Reference Guide

Index	Search	Glossary

Contents	Help

Using the Multi Photo Feeder

Using the Multi Photo Feeder to Scan

Follow the steps below to scan photos or business cards.

Note:

In the Home Mode and the Full Auto Mode, make sure photos or business cards for scanning in a single operation have the same size.

The Multi Photo Feeder applies the size of the first scanned photo or business card to the rest.

Load photos or business cards in the input tray of the Multi Photo Feeder.

Start EPSON Scan.

Choose the appropriate mode from the list box at the top right of the window. For details on how to select a scanning mode, see Changing a scanning mode.

To scan documents repeatedly with no preview using the default setting, select Full Auto Mode.

To scan documents repeatedly with no preview using the various setting, select Home Mode. For how to scan in the Home Mode, see Scanning in the Home Mode.

To scan documents with previewing and the specified adjustment setting one by one, select Professional Mode. For how to scan in the Professional Mode, see Scanning in the Professional Mode.

Scanning in the Home Mode

In the EPSON Scan main window, specify the Document Type, Image Type, and Destination settings.

Click the Image Adjustment button to specify the adjustment settings.

Click Scan. All documents in the input tray are scanned automatically.

Note:

Preview is not available in the Home Mode. If you want to preview all the documents one by one, you need to scan using the Professional Mode.

Scanning in the Professional Mode

In the EPSON Scan main window, make sure that MPF is selected from the Document Source list, and then choose the appropriate settings for scanning.

Click Preview. The preview window appears.

Note:

If no operation is done in 15 minutes after the preview of a document that is left loaded, the document is ejected automatically, and then the scanner enters the sleep mode.
To start the scanning operation again, load the ejected document in the Multi Photo Feeder again, and then click Preview.

If you do not want to preview each document, you need to scan using the Full Auto Mode or the Home Mode.

Draw a marquee (a frame around a part of a photo or business card) to define the part of the image you want to scan by dragging the mouse pointer over that area.

Use Target Size to specify the output size of the scanned image and specify the Adjustments settings, if necessary. (You may need to scroll to the bottom of the screen.)

Click Scan. The document you scanned is ejected to the output tray and the next document is previewed. Click Preview, if you do not want to scan and preview the next one.

Go to step 3, and repeat until all documents in the input tray are scanned.

[Top]