Reference Guide

Index	Search	Glossary

Contents	Help

How to / Printing with the EPL-N2750

Special Printing Operations

Printing on custom size paper
Printing one sheet at a time

This section explains how to print on custom size paper or to print out one page at a time.

Printing on custom size paper

You can use the MP tray to load non-standard paper sizes ranging from 86 x 140 mm (3.4 x 5.5 in.) to 297 x 432 mm (11.7 x 17 in.).

Before printing on custom size paper, you need to specify the paper size in the printer driver's Basic Settings tab. Select User Defined Size, then choose a Unit size and type the Paper Width and Paper Height settings for your custom paper. Click OK to save your custom paper size.

To make this setting from the printer's control panel, access OneTouch mode 1 and set the page size to CTM (custom). For details, see OneTouch mode 1.

Note:

After making custom paper size settings in the printer driver or SelecType menus, set the paper size for the MP tray using the SelecType Tray Menu. For instructions, see Tray Menu.

[Top]

Printing one sheet at a time

This mode is helpful when you want to check the print quality after each page is printed.

Follow these steps to print in the manual feed mode:

Access the printer driver.

Note:

If you have not installed the printer driver, install it as instructed by your administrator. The "Administrator's Guide" is included on this CD for your administrator.

In the Basic Settings tab, select the Manual Feed check box.

In the Paper Size drop-down list, scroll through the list of paper sizes and click the size that matches the paper you will load in the printer.

Insert a sheet or stack of the correct size paper into the desired paper source. Adjust the paper guides to match the paper size you are loading.

Send a print job from your application. The LCD panel shows Manual Feed and the selected page size and tray.

Press the On Line button on the control panel to print. The sheet of paper is fed and printed.

Press On Line again to print the next page, if necessary. Repeat this step for every page to be printed.

[Top]