|
|
How to / Functions of the Control Panel
OneTouch mode 1
OneTouch mode 2
The OneTouch modes allow you to make the most common printer settings from the control panel when printing from an application or operating system that does not support your printer driver. Be sure to use the printer driver to make these settings whenever you can, since settings made in the software always override OneTouch mode settings.
To make OneTouch mode settings, access one of the modes as described below and press the button located under the setting you want to change to cycle forward through the available options. You can also cycle backward through available options by holding down ALT and pressing the button under the setting you want to change.
To enter OneTouch mode 1, press the SelecType button (repeatedly if necessary) until the light next to Paper Source comes on. The current OneTouch mode 1 settings for Paper Source, Page Size, Manual Feed, and Orientation are shown on the LCD panel in this order.
Specifies whether paper feeds into the printer from the MP tray or from a standard or optional lower cassette. If you select Auto, the paper source containing the paper that matches the Page Size setting will be used.
Specifies the image size.
Turns the manual feed mode on or off. For details on the manual feed mode, see Printing one sheet at a time.
Specifies whether the page is printed in portrait or landscape orientation.
To enter OneTouch mode 2, press the SelecType button (repeatedly if necessary) until the indicator light next to RITech comes on. The current OneTouch mode 2 settings for RITech, Copies, MP Tray Size, and Toner Save Mode are shown on the LCD panel in this order.
Turns the RITech setting on or off. RITech produces smoother and crisper lines, text, and graphics.
Specifies the number of copies to be printed, up to 999.
Allows you to specify the paper size for the MP tray.
Turns the Toner Save mode on or off. When turned on, the printer saves toner by substituting a gray shade for the black inside of characters. The characters are outlined in full black on the right and lower edges.
Previous |
Next |
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |