Reference Guide

Index	Search	Glossary

Contents	Help

How to / Functions of the Control Panel

Control Panel Operation

LCD panel
Indicator lights
Buttons

The control panel is made up of three elements: a liquid crystal display (LCD) panel, indicator lights, and buttons. The LCD panel and indicator lights tell you the current status of the printer, and you can use the printer buttons to select settings and functions. However, settings made in application software and the printer driver usually override settings made in the control panel.

1. LCD panel
2. indicator lights
3. buttons

LCD panel

The LCD panel shows the following:

Status messages, such as Warming Up, indicating the printer's current status.

Error messages, such as Paper Out, identifying maintenance procedures you must perform or error conditions you need to correct.

SelecType menus, such as Emulation Menu, allowing you to control printer modes, font selection, paper handling, and many other printer functions.

[Top]

Indicator lights

This section describes the various indicator lights on the control panel.

1	On Line	On when the printer is online, indicating that the printer can receive and print data. When the printer is offline, this light is off. The light flashes as the system switches between online and offline status.
2	Data	On when data is received and stored in the printer buffer (printer memory reserved for receiving data), but not yet printed. Flashing indicates that the printer is processing data. When no data remains in the printer buffer, this light turns off.
3	Continue	Flashes when an error is detected or a maintenance procedure must be performed. Check the LCD panel for error or maintenance messages when this light is flashing.
4	OneTouch mode 1	On when the printer is in OneTouch mode 1. For details, see Using the OneTouch Modes.
5	OneTouch mode 2	On when the printer is in OneTouch mode 2. For details, see Using the OneTouch Modes.
6	SelecType	On when the printer is in the SelecType mode. For more information on the SelecType mode, see Using SelecType.

[Top]

Buttons

This section explains how to use the control panel buttons.

1	On Line	Switches the printer between online and offline status.
2	Form Feed	Pressing this button when the printer is offline and data remains in the printer's memory (Data light is on) prints out the data and clears the buffer.
3	Continue/ Reset	Pressing this button enables the printer to resume printing after certain maintenance-required conditions or errors have been cleared. If the Continue light is flashing, read the status or error message on the LCD panel and correct the problem as described in Status and Error Messages. If used in combination with the ALT button, the printer is reset.
4	SelecType/ ALT	Selects a OneTouch mode or SelecType mode. Press this button once to enter OneTouch mode 1. Press this button again to enter OneTouch mode 2. Press this button once more to enter the SelecType mode. Pressing this button while in the SelecType mode returns the printer to online status.
5	Menu	Selects the corresponding OneTouch mode setting listed above this button if in OneTouch mode 1 or 2, or selects the SelecType menu if in the SelecType mode. Press this button when the printer is online to enter the SelecType mode.
6	Item	Selects the corresponding OneTouch mode setting listed above this button if in OneTouch mode 1 or 2, or selects the function available within the current menu after entering the SelecType mode.
7	Value	Selects the corresponding OneTouch mode option listed above this button if in OneTouch mode 1 or 2, or selects the value available for the current item, after entering the SelecType mode menu.
8	Enter (Status Sheet)	Selects the corresponding OneTouch mode option listed above this button if in OneTouch mode 1 or 2, or activates the setting currently shown on the LCD panel when in SelecType mode. Press this button two times when the printer is online to print a status sheet.
ALT + Menu, Item, or Value		Returns the shown parameter or setting in each group to its previous value.

[Top]