Reference Guide

Index
Search
Glossary
Contents
Help

Problem Solver

Memory Problems

The message Collate was disabled appears on the LCD panel
The message Duplex Men Overflow appears on the LCD panel
The message Image Optimum appears on the LCD panel
The message Mem Overflow appears on the LCD panel
The message Need Momory appears on the LCD panel
The message Print Overrun appears on the LCD panel

The message Collate was disabled appears on the LCD panel

Cause What to do
The printer has insufficient memory to collate the print job. Only one copy was printed. Increase printer memory. See Memory Module for details.


[Top]

The message Duplex Men Overflow appears on the LCD panel

Cause What to do
There is not enough memory for duplex printing. The printer prints only on the top side and ejects the paper. If Auto Cont is set to Off in the Setup Menu, press the Start/Stop button. If Auto Cont is set to On in the Setup Menu, the error is automatically corrected after a certain period of time.


[Top]

The message Image Optimum appears on the LCD panel

Cause What to do
The printer has insufficient memory to print the page at the specified print quality. The printer automatically reduces the print quality so that it can continue printing. If the quality of the printout is not acceptable, try simplifying the page by limiting the number of graphics or reducing the number and size of fonts. Lower the resolution setting to 300 dpi.


[Top]

The message Mem Overflow appears on the LCD panel

Cause What to do
The printer has insufficient memory to execute the current task. To correct the error, press the Start/Stop button on the control panel.


[Top]

The message Need Momory appears on the LCD panel

Cause What to do
The printer has insufficient memory available for the current task. To correct the error, press the Start/Stop button on the control panel.
You may need to increase the amount of printer memory. For more information on adding memory, see Memory module.


[Top]

The message Print Overrun appears on the LCD panel

Cause What to do
The required time to process the print data exceeds the print engine speed because the current page is too complex. To correct the error, press the Start/Stop button to resume printing. If this message appears again, turn on Page Protect in the Setup Menu. If you continue to receive this message when printing a particular page, try simplifying the page by limiting the number of graphics or reducing the number and size of fonts.
You may need to increase the amount of printer memory to avoid getting this error repeatedly. For more information on adding memory, see Memory module.


[Top]


Previous

Next
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION