|
|
|
|||||||||||||||||||||||||||||||||
Problem Solver
All the copies you specified are not printed
| Cause | What to do |
| The printer has insufficient memory to collate the print jobs. Only one copy was printed. | Decrease the printing resolution or increase printer memory. See Memory Module for details. |
| Cause | What to do |
| There is not enough memory for duplex printing. The printer prints only on the top side and ejects the paper. | Decrease the printing resolution or increase printer memory. For information on installing more memory, see Memory Module for details. |
| Cause | What to do |
| The printer has insufficient memory to print the page at the specified print quality. | The printer automatically reduces the print quality so that it can continue printing. If the quality of the printout is not acceptable, try simplifying the page by limiting the number of graphics or reducing the number and size of fonts. Lower the resolution setting. |
| Cause | What to do |
| The printer has insufficient memory to execute the current task. | To correct the error, turn the printer off, waiting 10 seconds, and then turning it back on. If your printer cannot connect in ECP mode, the printer may not be able to print with the standard memory. However, it may be necessary to reduce the contents, lower the resolution, or add more memory to the printer. For information on installing more memory, see Memory Module. |
 Previous |
 Next |
| Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |
