|
|
Product Information
To use your printer with a PC
To use your printer with a Macintosh
To use your printer, you need Microsoft® Windows® Millennium Edition, 98, 95, XP, 2000, or NT 4.0, and a shielded, twisted-pair parallel cable. If you want to connect your printer to a USB port, you need a Windows Me, 98, XP, or 2000 pre-installed PC equipped with a USB port, and a shielded USB cable.
Your computer should also meet the following system requirements:
Minimum system |
Recommended system |
Pentium for Windows 98, 95, and NT 4.0 |
Pentium III 1 GHz or higher processor |
32 MB RAM for Windows Me, 98, 95, NT 4.0 |
128 MB RAM or more |
100 MB hard disk space for Windows Me, 98, 95, XP, 2000, and NT 4.0 |
8 GB or more free disk space |
VGA monitor |
VGA or better monitor |
Your computer dealer can help you update your system if it does not meet these requirements.
Note: |
The memory requirements above are for printing on B0 (1030 x 1456 mm) size paper. These requirements may vary depending on the size of the paper, the type of application you are using, and the complexity of the document you want to print. |
To use this printer, your Apple® Macintosh® must meet the following system requirements. You also need a USB cable to connect this printer to your Macintosh.
Minimum system |
Recommended system |
PowerPC |
PowerPC G4 733 MHz/PowerPC G3 733 MHz or higher processor |
Mac OS 8.5.1 |
Mac OS 9.1 or later |
48 MB of available memory |
80 MB or more of available memory |
- |
8 GB or more free disk space |
|
|
|
In addition to these system and memory requirements, you also need 29 MB of free hard disk space to install your printer software.
Previous |
Next |
Version 1.10E, Copyright © 2002, SEIKO EPSON CORPORATION |