|
|
Product Information
Printing
Printable area
Mechanical
Electrical
Environmental
Initialization
Standards and Approvals
Paper
Ink cartridges
Printing method |
On-demand ink jet |
Nozzle configuration |
Black: 96 nozzles x 2 |
Character mode:
Character Pitch |
Printing Column |
10 cpi* |
237 for StylusPro 7600 |
* characters per inch |
Raster graphics mode:
Horizontal resolution |
Printable width |
Available dots |
360 dpi* |
604 mm |
8698 |
720 dpi |
604 mm |
17395 |
1440 dpi |
604 mm |
34790 |
2880 dpi |
604 mm |
69581 |
Horizontal resolution |
Printable width |
Available dots |
360 dpi* |
1112 mm |
15762 |
720 dpi |
1112 mm |
31524 |
1440 dpi |
1112 mm |
63048 |
2880 dpi |
1112 mm |
126087 |
* dots per inch |
Resolution |
Maximum 2880 dpi x 1440 dpi |
Print direction |
Bidirectional |
Control code |
ESC/P Raster |
Line spacing |
1/6 inch or programmable in 1/1440 inch increments |
Paper feed speed |
215 ± 10 mm seconds per 1/4 inch line |
RAM |
32 MB for StylusPro 7600 |
Character tables |
PC 437 (US, Standard Europe), |
Character sets |
EPSON Courier 10 cpi |
Roll paper and cut sheets
A |
For roll paper, the minimum top margin is 3.0 mm (0.12")*. |
B-L |
For roll paper, the minimum left margin is 0 mm (0")*. |
B-R |
For roll paper, the minimum right margin is 0 mm (0")*. |
C |
For roll paper, the minimum bottom margin is 3.0 mm (0.12")*. |
* For roll paper, the following margin widths can be selected using the control panel as follows. For details, see in PAPER MARGIN. |
Parameter |
A |
B-L |
B-R |
C |
3 mm |
3 mm |
3 mm |
3 mm |
3 mm |
15 mm |
15 mm |
15 mm |
15 mm |
15 mm |
T/B 15 mm (Default) |
15 mm |
3 mm |
3 mm |
15 mm |
Note: |
The printer automatically detects the dimensions of the paper that is loaded. Print data that exceeds the printable area of the paper cannot be printed. |
Paper feed method |
Friction |
Paper path |
Roll paper or cut sheets with manual insertion |
Dimensions (printing) |
StylusPro 7600:
StylusPro 9600: |
Weight |
StylusPro 7600:
StylusPro 9600:
Stand: |
|
Rated 100 V to 240 V |
|
Input voltage range |
90 to 264 V |
|
Rated frequency range |
50 to 60 Hz |
|
Input frequency range |
49 to 61 Hz |
|
Rated current |
1.0 - 0.5 A |
|
Power consumption |
Stylus Pro 7600:
Stylus Pro 9600: |
Note: |
Check the label on the back of the printer for voltage information. |
Temperature |
Operation: |
10 to 35°C (50 to 95°F) |
Humidity |
Operation: |
20 to 80% RH** |
* Stored in shipping container |
** Without condensation |
Operational conditions (temperature and humidity):
Hardware initialization at power on: |
|
|
The printer mechanism is set to its initial state. |
Software initialization when the ESC@ (initialize the printer) command is received: |
|
|
The print buffer is cleared. |
Panel button initialization by pressing the Pause button on the control panel for 3 seconds, or *INIT signal is send: |
|
|
Print head capping occurs. |
Safety |
UL 1950 EN 60950 |
EMC |
FCC part 15 subpart B class B EN 55022 Class B |
Warning: |
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. |
Note: |
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper before purchasing large quantities or printing large jobs. |
Roll paper:
Size |
|
Internal diameter: |
StylusPro 7600: |
Internal diameter: 3 inch |
StylusPro 7600: |
Outer diameter |
103 mm (4.05 inches) maximum for standard/optional 2-inch roll paper spindle |
Paper types |
Plain paper, special papers distributed by EPSON |
Thickness |
0.08 to 0.50 mm (0.003 to 0.019 inches) |
Weight |
64 gf/m2 (17 lb) to 90 gf/m2 (24 lb) |
Cut sheets:
Size |
Super B0 (1118 x 1580 mm)* |
Paper types |
Plain paper, special papers distributed by EPSON |
Thickness |
0.08 to less than 0.11 mm |
Weight |
64 gf/m2 (17 lb) to 90 gf/m2 (24 lb) |
* for StylusPro 9600 use only. |
Note: |
|
|
Use paper under the following conditions: |
||
|
Temperature 15 to 25°C (59 to 77°F) |
|
EPSON Photo Quality Glossy Film should be stored under the following conditions: |
||
|
Temperature 15 to 30°C (59 to 86°F) |
Note: |
A 110 ml ink cartridge is standard. An optional 220 ml ink cartridge is available for Stylus Pro 9600. |
EPSON UltraChrome ink
|
Standard |
Optional |
Photo Black |
T5431 |
T5441 |
Dye ink
|
Standard |
Black |
T5451 |
Cartridge life |
EPSON UltraChrome |
2 years from production date if unopened; |
Dye |
2 years from production date if unopened; |
|
Temperature |
Storage (uninstalled): |
-30 to 40°C (-22 to 104°F) |
Storage (installed): |
-20 to 40°C (-4 to 104°F) |
|
While transportation: |
120 hours at 60°C (140°F) |
|
Dimensions |
Standard cartridge: |
25.1 (W) x 165.8 (D) x 106.6 (H) |
Optional cartridge: |
25.1 (W) x 280.8 (D) x 106.6 (H) |
|
Weight |
Standard cartridge: |
Approx. 200 g (0.44 lb.) |
Optional cartridge: |
Approx. 385 g (0.85 lb) |
|
Capacity |
Standard: |
110 ml |
Optional: |
220 ml |
Caution: |
|
|
|
Previous |
Next |
Version 1.10E, Copyright © 2002, SEIKO EPSON CORPORATION |