|
|
Product Information
Parallel interface
USB interface
Your printer is equipped with an 8-bit parallel interface and a USB interface.
The built-in parallel interface has the following characteristics.
Data format |
8-bit parallel |
Synchronization |
STROBE pulse |
Handshake timing |
BUSY and ACKNLG signals |
Signal level |
TTL level (IEEE-1284 level 1 device) |
Adaptable connector |
57-30360 Amphenol connector or equivalent |
Transmission mode |
8-bit parallel |
Synchronization |
STROBE pulse |
Handshaking |
BUSY and ACKNLG signals |
Signal level |
TTL level (IEEE-1284 level 1 device) |
Data transmission timing |
Refer to the IEEE-1284 specification |
Transmission mode |
IEEE-1284 ECP mode |
Synchronization |
Refer to the IEEE-1284 specification |
Handshaking |
Refer to the IEEE-1284 specification |
Signal level |
TTL level (IEEE-1284 level 1 device) |
Data transmission timing |
Refer to the IEEE-1284 specification |
The printer's built-in USB interface is based on the standards specified in the Universal Serial Bus Specifications Revision 1.1 and the Universal Serial Bus Device Class Definition for Printing Devices Version 1.1. This interface has the following characteristics.
Standard |
Based on Universal Serial Bus Specifications Revision 1.1, Universal Serial Bus Device Class Definition for Printing Devices Version 1.1 |
Bit rate |
12 Mbps (full speed device) |
Data encoding |
NRZI |
Adaptable connector |
USB Series B |
Recommended cable length |
2 meters |
Previous |
Next |
Version 1.10E, Copyright © 2002, SEIKO EPSON CORPORATION |