Reference Guide
|
|
Problem Solver
Printouts Are Not What You Expected
Incorrect or garbled characters
Incorrect margins
Inverted image
Blank pages print
Printout has smears on the bottom edge
Printing is too slow
If one of the following problems has occurred, try the solutions listed for the problem.
Incorrect or garbled characters
Try one or more of these solutions:
-
Select your printer as the default printer in Windows.
-
Turn off the printer and computer. Make sure the printer's interface cable is securely plugged in.
-
If you are using Windows NT 4.0, try to uninstall the EPSON Printer Port. Click Start, point to Programs, then point to EPSON Printers and click EPSON Printer Port Uninstall. Follow the instructions on the screen.
[Top]
Incorrect margins
Try one or more of these solutions:
-
Check the margin settings in your application software. Make sure the margins are within the printable area of the page. See Paper for specifications.
-
Check the settings on the Paper menu (for Windows) or in the Page Setup dialog box (for Macintosh). Make sure the settings are appropriate for the paper size you are using.
[Top]
Inverted image
Clear the Flip Horizontal check box in the printer driver, or the "Mirror" setting in your application software. For instructions, see the online help for the printer driver or for your application.
For Macintosh, see also Using the Advanced settings.
[Top]
Blank pages print
Try one or more of these solutions:
-
Select your printer as the default printer in Windows.
-
For Windows, check the settings in the Paper dialog box. Make sure they are appropriate for the paper size you are using.
For Macintosh, check the settings in the Page Setup dialog box. Make sure they are appropriate for the paper size you are using.
-
Run the Head Cleaning utility to clear any clogged nozzles. Windows 95 or 98 users can start the now.
After trying one or more of these solutions, run a printer operation check to check your results. See Running a printer operation check for details.
[Top]
Printout has smears on the bottom edge
Try one or more of these solutions:
-
If the paper is curled toward the printable side, flatten it or curl it slightly toward the opposite side.
-
Set the adjust lever to the "+" position, and clear the High Speed check box in your printer driver's Advanced dialog box. The Advanced dialog box is accessible through the Main menu (for Windows) or Print dialog box (for Macintosh) when Custom is selected as the Mode setting. To turn this option off, you may also need to change the Print Quality setting.
[Top]
Printing is too slow
Try one or more of these solutions:
-
Select Automatic as the Mode setting on your printer driver's Main menu (Windows) or in the Print dialog box (Macintosh) and then move the slider to Speed. For instructions, see Using the Automatic mode for Windows or Using the Automatic mode for Macintosh.
-
Close any applications you are not using at the moment.
-
If you upgraded from Windows 95 to Windows 98, uninstall the printer software using Add/Remove Programs in the Control Panel in Windows, then install the software again.
[Top]
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |