Reference Guide
|
|
Problem Solver
Printouts Are Not What You Expected
Incorrect or garbled characters
Incorrect margins
Inverted image
Blank pages print
Printout has smears on the bottom edge
Printing is too slow
If one of the following problems has occurred, try the solutions listed for the problem.
Incorrect or garbled characters
Try one or more of these solutions:
-
Select your printer as the default printer in Windows.
-
Unplug the printer and turn off the computer. Make sure the printer's interface cable is securely plugged in.
[Top]
Incorrect margins
Try one or more of these solutions:
-
Check the margin settings in your application. Make sure the margins are within the printable area of the page. See Paper for specifications.
-
For Windows, check the settings on the Paper menu. Make sure the settings are appropriate for the paper size that you are using.
For Macintosh, check the settings in the Page Setup dialog box. Make sure the settings are appropriate for the paper size that you are using.
[Top]
Inverted image
Clear the Flip Horizontal check box in the printer driver, or turn off the "Mirror" setting in your application. For instructions, see the online help for the printer driver or for your application.
Macintosh users can refer to Making advanced settings.
[Top]
Blank pages print
Try one or more of these solutions:
-
Select your printer as the default printer in Windows.
-
For Windows, check the settings on the Paper menu. Make sure they are appropriate for the paper size that you are using.
For Macintosh, check the settings in the Page Setup dialog box. Make sure they are appropriate for the paper size that you are using.
-
Run the Head Cleaning utility to clear any clogged nozzles. Windows 98 users can start the now.
[Top]
Printout has smears on the bottom edge
Try one or more of these solutions:
-
If the paper is curled toward the printable side, flatten it or curl it slightly toward the opposite side.
-
Clear the High Speed check box in your printer driver's Advanced dialog box. The Advanced dialog box is accessible through the Main menu (Windows) or Print dialog box (Macintosh) when Custom is selected as the Mode setting. To turn this option off, you may also need to change the Print Quality setting.
[Top]
Printing is too slow
Try one or more of these solutions:
-
Select Automatic as the Mode setting on your printer driver's Main menu (Windows) or in the Print dialog box (Macintosh) and then move the slider to Speed. For instructions, see Using the Automatic mode for Windows or Using the Automatic mode for Macintosh.
-
Close any applications you are not using at the moment.
[Top]
Version 1.00E, Copyright © 2001, SEIKO EPSON CORPORATION |