User's Guide
|
|
Maintaining PictureMate
Aligning the Print Head
Using the Print Head Alignment utility
Using the control panel buttons
If you have moved PictureMate and print quality is not as good as it was before for example, you see misaligned vertical lines or light or dark horizontal banding you may need to align the print head.
Using the Print Head Alignment utility
For Windows
Follow the steps below to align the print head using the Print Head Alignment utility.
|
Check that no warnings or errors are displayed on the LCD panel.
|
|
Make sure that paper is loaded in the paper support.
|
|
Access the printer driver.
|
|
Click the Maintenance tab, then click the Print Head Alignment button.
|
|
Follow the on-screen instructions to align the print head.
|
For Mac OS X
Follow the steps below to align the print head using the Print Head Alignment utility.
|
Check that no warnings or errors are displayed on the LCD panel.
|
|
Make sure that paper is loaded in the paper support.
|
|
Access the EPSON Printer Utility dialog box.
|
|
Click the Print Head Alignment button in the Utility dialog box.
|
|
Follow the on-screen instructions to align the print head.
|
[Top]
Using the control panel buttons
|
Make sure that the printer is turned on and no warnings or errors are displayed on the LCD panel.
|
|
Press the Mode button to select .
|
|
Press the or button to select Align Print Head.
|
|
Press the Start button to print the alignment pattern.
|
|
The following alignment sheet is printed.
|
|
Look at the alignment pattern in each set and find the patch which is most evenly printed, with no noticeable streaks or lines.
|
|
Press the or button to highlight the number for the best pattern (1 to 9).
|
|
Press the Start button to exit the alignment screen.
|
[Top]
Version NPD1531-00, Copyright © 2005, SEIKO EPSON CORPORATION |