|
Reference Guide
|
|
Scanning / Various Scanning Options
Scanning Images for Printing
Scanning images for printing in the Full Auto Mode
Scanning images for printing in the Home Mode
Scanning images for printing in the Professional Mode
When you want to print scanned images, set the output resolution to 300 dpi. If you select a resolution higher than 300 dpi, printing takes a longer time but the output quality does not change.
You can also use the RePrint Photo feature in the EPSON Smart Panel software to scan images for printing. For more details, see RePrint Photos.
Scanning images for printing in the Full Auto Mode
Follow the steps below to scan images for printing in the Full Auto Mode.
 |
Place your materials on the document table.
|
 |
Start EPSON Scan.
|
EPSON Scan starts previewing and recognizing the document source and type.
 |
Click Pause, and then click Options.
|
 |
Select the Specify resolution for Full Auto Mode check box.
|
 |
Select 300 from the list for Reflective, and then click OK.
|
 |
Click Scan. EPSON Scan starts scanning.
|
The scanned images are sent to the application or saved to the specified folder.
 |
Caution:
|
 | |
Do not open the scanner unit during scanning or copying; otherwise, you may damage this product.
|
|
 |
Note:
|
| -
If EPSON Scan cannot recognize the correct document source, you can specify the document type in the Options dialog box. For details, see online help.
|
|
| -
Depending on the image you want to scan, you may not get the expected scanned image. In this case, scan the image in the Home Mode or Professional Mode.
|
|
[Top]
Scanning images for printing in the Home Mode
Follow the steps below to scan images for printing in the Home Mode.
|
|
Place your materials on the document table.
|
|
|
Start EPSON Scan.
|
The following window appears.
|
|
Specify the Document Type and Image Type settings to match your images.
|
|
|
Select Printer as the Destination.
|
|
|
Click Preview to preview the images.
|
|
|
Specify the output size of the scanned image as the Target Size and make adjustments using the image quality adjustment tools, if necessary.
|
 |
Click Scan. EPSON Scan starts scanning.
|
The scanned images are sent to the application or saved to the specified folder.
|
Caution:
|
| |
Do not open the scanner unit during scanning or copying; otherwise, you may damage this product.
|
|
[Top]
Scanning images for printing in the Professional Mode
Follow the steps below to scan materials for printing in the Professional Mode.
|
|
Place your materials on the document table.
|
|
|
Start EPSON Scan.
|
The following window appears.
|
|
Specify the Original and Image Type settings to match your images.
|
|
|
Select 300 dpi from the Resolution list.
|
|
|
Click Preview to preview the images.
|
|
|
Specify the output size of the scanned image as the Target Size and make adjustments using the image quality adjustment tools, if necessary.
|
|
|
Click Scan. EPSON Scan starts scanning.
|
The scanned images are sent to the application or saved to the specified folder.
|
Caution:
|
| |
Do not open the scanner unit during scanning or copying; otherwise, you may damage this product.
|
|
[Top]
| Version NPD0179-00, Copyright © 2003, SEIKO EPSON CORPORATION |
