Printer Parts
Control Panel

a. Edge guide: Helps load the paper straight. Adjust the left edge guide to fit the width of your paper.

b. Sheet feeder: Feeds a stack of paper automatically.

c. Paper support extension: Used to supports larger sized paper in the sheet feeder.

d. Paper support: Supports the paper loaded in the paper feeder.

e. Feeder guard: Prevents the objects which you place on the document cover from falling inside this printer when opening the document cover.

f. Document cover: Open and close when you place a photo or document.

g. Output tray: Receives ejected paper.

h. Output tray extension: Supports the ejected paper.

i. Scanner unit: Open and close when you replace an ink cartridge.

j. On button: Turns this printer on and off.

a. Cartridge cover: Hold the ink cartridge in place.

a. Document table: Place originals face-down on the glass.

b. Control Panel: See “Control Panel” for details on panel operation.

a. USB cable connector: Connect this printer with your computer.

b. AC inlet: Connect the power cord.

Top

	Button	Function
1	On	Press to turn the printer on and off.
2		Press to replace ink cartridges. Press and hold for 3 seconds to clean the print head (when the light is off).
3	10 × 15 4" × 6" A4	Press to select the size of the paper loaded in the sheet feeder.
4	Fit to Page	Press to reduce or enlarge the copied image to fit the selected paper size.
5	Start B&W	Press to copy in black and white.
6	Start Color	Press to copy in color.
7	Stop	Press to stop copying. The sheet being printed is ejected.

Note:

All lights except On light will turn off if no buttons have been pressed for 15 minutes. Press any button except On button to return the lights to their former state.

Top