Reference Guide

Index Search Glossary Contents Help

Printing / Basic Printing Information

Using Special Media

Loading capacities for Epson special media
Storing Epson Photo Paper

You can achieve good results with most types of plain bond paper. However, coated paper and glossy film provide superior printouts because they absorb less ink.

Epson provides special media that are formulated for the ink used in Epson ink jet products. Epson recommends using media distributed by Epson to ensure high-quality results.

When loading special media distributed by Epson, read the instruction sheets packed with the media first and keep the following points in mind.

Caution:

Cleaning sheets packaged with Epson special media should not be used with this product. The cleaning function performed by these sheets is not necessary with this type of product, and the sheets could jam in the product.

Note:

Load the media into the sheet feeder printable side up. See the instruction sheets packed with the media to determine which side is the printable side. Some types of media have cut corners to help identify the correct loading direction.

If you extend the printable area by selecting Minimize Margins as the Printable Area setting in the product software, the cut corner on special paper may mar your printout.

Make sure that the paper stack fits under the arrow mark on the side of the left edge guide.

Make sure that the paper is loaded under the tabs inside the edge guides.

If the paper is curled, flatten it or curl it slightly in the opposite direction before loading. Printing on curled paper may cause ink to smear on your printout.

Loading capacities for Epson special media

Refer to the chart below to find the loading capacities for Epson special media.

[Top]

Storing Epson Photo Paper

Return unused paper to the original package as soon as you finish printing. Epson recommends storing your printouts in a resealable plastic bag. Keep them away from high temperature, humidity, and direct sunlight.

[Top]