|
|
0 slash,
A.G.M. (IBM PPDS),
Aligning vertical lines,
Auto CR (IBM PPDS),
Auto I/F (interface) wait time,
Auto line feed,
Auto tear-off,
Bidirectional adjustment mode,
Bidirectional printing (Bi-D),
Built-in font,
selecting,
Button
Font,
LF/FF,
Load/Eject,
Pause,
Pitch,
Tear-Off/Bin,
Buzzer
beep pattern,
Buzzer (beeper) setting,
Canceling printing,
Clients
with Windows Me or 98,
with Windows NT 4.0,
with Windows XP or 2000,
Contacting EPSON,
Continuous paper
problems,
Control panel
buttons and lights,
Customer support,
Default settings
changing,
default settings mode,
Diagnosing the problem,
Driver (printer driver),
Electrical,
EPSON Status Monitor 3,
accessing,
installing,
setting up,
Error indication,
ESC/P,
Font selection mode,
Hex dump,
High Speed Draft (HSD),
I/F (interface) mode,
IBM PPDS emulation,
IP address
setting,
Lock-out mode,
Packet mode,
Page length for tractor,
Paper jam
clearing,
Paper specifications,
Parallel I/F (interface) bidirectional mode,
Parallel interface,
Printable area,
Print direction,
Printer
sharing,
Printer driver
accessing
from Windows 2000 or Windows NT 4.0,
from Windows Me or 98,
settings,
uninstalling,
Ribbon cartridge
replacing,
SelecType
changing,
SelecType mode,
Self test,
Single sheets
problems,
Skip over perforation,
Specifications
built-in fonts,
command lists
ESC/P,
IBM PPDS emulation,
environmental,
standards and approvals,
Status Monitor 3,
Tear-Off/Bin button,
Technical support,
Troubleshooting
network problems,
option problems,
paper loading or feeding problems,
power supply problems,
printing or printout quality problems,
printing position problems,
USB problems,
Unidirectional (Uni-d) printing,
Uninstalling
printer software,
USB device driver,
USB interface,
problems,
Version NPD1014-01, Copyright © 2005, SEIKO EPSON CORPORATION |