Reference Guide

Index	Search	Glossary

Contents	Help

Advanced Scanning / Scanning in the Manual Mode

Overview of Scanning Procedure in the Manual Mode

Scanning procedure in the Manual mode
Overview of the Manual mode window

In the Manual mode, there are many more options available to give you greater control over your scanning. You can sharpen, correct, enhance or preview your images before scanning them in the Manual mode.

Scanning procedure in the Manual mode

Scanning in the Manual mode involves the following procedure:

Start a TWAIN-compliant application.

In the application, open EPSON TWAIN 5.

In the EPSON TWAIN Manual mode window, select Document Source, Image Type, and Destination, and then click the Full Preview button. The image is previewed in the Preview window on the right side of the Manual mode window.

Make additional image adjustment in the Preview window, and then click the Scan button. The image is scanned.

Save the scanned image.

Note:

You can operate EPSON TWAIN in the same way on both Windows and Macintosh. This guide explains the operation procedure using the Windows examples.

[Top]

Overview of the Manual mode window

The Manual mode window consists of the following parts and buttons. See the table below to identify each part's name and function.

Note for Macintosh users:

Most illustrations shown in this section are for Windows, so they may vary in appearance from what actually appears on your screen. The instructions are the same, except as noted.

Button	Name	Function
-	Document Source	Selects a document source. See Selecting a Document Source.
-	Image Type	Selects the type of image to be scanned. See Selecting an Image Type.
-	Destination	Selects a destination or output device. See Selecting a Destination.
-	Resolution	Sets the resolution. See Selecting the Resolution.
-	Unsharp Mask	Improves image sharpness. See Selecting the Unsharp Mask.
-	Source field	Indicates the size of the image displayed or selected in the Preview window. See Specifying Source and Target Image Sizes.
-	Target field	Indicates size of the image when output. See Specifying Source and Target Image Sizes.
	Image Controls button	Optimizes the image. See Adjusting Brightness and Contrast.
	Tone Correction button	Optimizes the image. See Applying a preset tone curve.
	Color Adjustment button	Optimizes the image. See Adjusting Color.
	Auto Exposure button	Automatically optimizes the exposure for an image. See Using the Auto Exposure Button.
	Reset button	Returns image control settings you modified back to their default settings. See Resetting the color settings.
	Full Preview button	Previews the image. See Using the Full Preview Button.
	Zoom Preview button	Previews a part of the image already in the Preview window. See Preview.
	Auto Locate button	Commands the scanner to automatically locate and select the target image. See Preview.
	Zoom Preview button	Previews a selected thumbnail image zoomed in. See Thumbnail Preview.
	Return button	Returns the image to the thumbnail preview from the zoom preview. See Thumbnail Preview.
	90 Degrees Rotate button	Rotates the selected image by 90 degrees. See Thumbnail Preview.
	Mirroring button	Changes the selected image to its mirror image. See Thumbnail Preview.
	Scan button	Scans the image or the active marquee in the Preview window. See Using the Scan Button.
	Settings button	Views all the settings for the currently previewed image. See Using the Settings Dialog Box.
	Configuration button	Makes settings which affect the Preview window. See Making Configuration Settings.
	Full Auto mode button	Switches to the Full Auto mode.
	Close button	Closes the Manual mode window.
	Help button	Accesses the online help.

Note:

If some settings appear dimmed or are not displayed in the Manual mode, they cannot be selected because of your scanner type or your choice of other settings.

For details about each TWAIN setting, refer to the online help.

[Top]