|
|
|
|||||||||||||||||||||||||||||||||
Problem Solver
The background is dark or dirty
| Cause | What to do |
| You may not be using the correct type of paper for your printer. | If the surface of your paper is too rough, printed characters may appear distorted or broken. EPSON special paper, or smooth, high-quality copier paper is recommended for best results. See Available paper types for information on choosing paper. |
|
The paper path inside the printer may be dusty. |
Turn off the printer. Clean internal printer components by printing three pages with only one character per page. |
| Cause | What to do |
|
The paper path inside the printer may be dusty. |
Turn off the printer. Clean internal printer components by printing three pages with only one character per page. |
| Cause | What to do |
| Your paper may be moist or damp. | Do not store paper in a humid or damp environment. |
|
There may be no toner left in the imaging cartridge. |
If the message on the LCD panel or in EPSON Status Monitor 3 indicates that the amount of toner left is low, see Replacing the imaging cartridge. |
| Cause | What to do |
| Your paper may be moist or damp. | Do not store paper in a humid or damp environment. Be sure to use paper that is newly unwrapped. |
| There may be no toner left in the imaging cartridge. | If the message on the LCD panel or in EPSON Status Monitor 3 indicates that the amount of toner is low, see Replacing the imaging cartridge. |
|
The gradation setting is too small when printing graphics. |
On the Basic Setting menu in the printer driver, click More Settings, select the Enh.MG button, then select Smooth. |
| Cause | What to do |
| Your paper may be moist or damp. | Do not store your paper in a humid or damp environment. |
| You may not be using the correct type of paper for your printer. | EPSON special paper or smooth, high-quality copier paper is recommended for best results. See Available paper types for information on choosing paper. |
|
The paper path inside the printer may be dusty. |
Turn off the printer. Clean internal printer components by printing three pages with only one character per page. |
| Cause | What to do |
| Your paper may be moist or damp. | This printer is sensitive to moisture absorbed by the paper. The higher the moisture content in the paper, the lighter the printout. Do not store paper in a humid or damp environment. |
|
You may not be using the correct type of paper for your printer. |
If the surface of your paper is too rough, printed characters may appear distorted or broken. EPSON special paper or smooth, high-quality copier paper is recommended for best results. See Available paper types for information on choosing paper. |
| Cause | What to do |
| The printer may have loaded more than one sheet at a time. | Remove the paper stack and fan it. Tap it on a flat surface to even the edges. Then reload the paper. |
| There may be no toner left in the imaging cartridge. | If the message on the LCD panel or in the EPSON Status Monitor 3 indicates that the amount of toner is low, see Replacing the imaging cartridge. |
| The problem may be with your application or interface cable. | Print out a status sheet. See Printing a Status Sheet. If a blank page is ejected, the problem may be with the printer. Turn off the printer and contact your dealer. |
|
The Paper Size setting may be incorrect. |
Make sure the correct paper size is set in the Tray menu on the control panel. |
| Cause | What to do |
| Your paper may be moist or damp. | Do not store your paper in a humid or damp environment. |
| The Toner Save mode may be on. | Turn off the Toner Save mode using the printer driver or the printer's control panel menus. |
| There may be no toner left in the imaging cartridge. | If the message on the LCD panel or in EPSON Status Monitor 3 indicates that the amount of toner left is low, replace the imaging cartridge. See Replacing the imaging cartridge for instructions. |
|
The Density setting may be too low. |
Increase the Density setting in the Printing menu on the control panel. |
| Cause | What to do |
|
Toner may have spilled onto the paper feed path. |
Clean internal printer components by printing three pages with only one character per page. |
 Previous |
 Next |
| Version NPD0173-00, Copyright © 2003, SEIKO EPSON CORPORATION |
