Reference Guide

Index
Search
Glossary
Contents
Help

How to / Controlling the Printer

Using the OneTouch Modes

OneTouch mode 1
OneTouch mode 2

The OneTouch modes allow you to make the most common printer settings from the display panel when printing from an application or operating system that does not support your printer driver. Be sure to use the printer driver to make these settings whenever you can, since settings made in the software always override OneTouch mode settings.

To make OneTouch settings, access one of the modes as described below and press the button located under the setting you want to change to cycle forward through the available options. You can also cycle backward through available options by holding down ALT (SelecType) while pressing the button under the setting you want to change.

OneTouch mode 1

To enter OneTouch mode 1, press the SelecType button (repeatedly if necessary) until the light next to paper source comes on. The current OneTouch mode 1 settings for paper source, Page Size, Manual Feed, and Orientation are shown on the display panel in this order.

Paper Source

Specifies whether paper feeds into the printer from the MP tray, the optional Envelope Feeder or from a standard or optional lower cassette. If you select Auto, the paper source containing the paper that matches the setting in the Page Size menu will be used.

Page Size

Specifies the image size.

Manual Feed

Turns Manual Feed on or off. For details on the Manual Feed mode, see Manually loading paper.

Orientation

Specifies whether the page is printed in portrait or landscape orientation.


[Top]

OneTouch mode 2

To enter OneTouch mode 2, press the SelecType button (repeatedly if necessary) until the indicator light next to RITech comes on. The current OneTouch mode 2 settings for RITech, Copies, MP tray Size, and Toner Save Mode are shown on the display panel in this order.

RITech

Turns the RITech setting on or off. RITech produces smoother and crisper lines, text and graphics.

Copies

Specifies the number of copies to be printed, up to 999.

MP Tray Size or ENV Tray Size

Allows you to specify the paper size for the MP tray. If you use the optional Envelope Feeder, Env Tray Size is shown on the display panel and you can specify the paper size for the Envelope Feeder, instead.

Toner Save Mode

Turns the Toner Save Mode on or off. When turned on, the printer saves toner by substituting a gray shade for the black inside characters. The characters are outlined in full black on the right and lower edges.


[Top]


Previous

Next
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION