|
|
How To / Settings for NetWare Server
Supported systems
About modes
This chapter explains how to configure the print server for NetWare. First, you need to set up the printer in a NetWare environment, and then configure the print server using EpsonNet WinAssist.
NetWare 3.1/3.11/3.12/3.2 (Bindery)
NetWare 4.1/4.11/4.2 (NDS, Bindery emulation)
IntranetWare (NDS, Bindery emulation)
NetWare 5.0/5.1 (NDS, NDPS)
NetWare 6.0 (NDS, NDPS)
The client environment must be supported by NetWare.
The clients are able to use the printer driver mounted on the print server.
The following Novell Client is supported.
- For Windows Me/98/95:
Novell Client 3.3 or higher for Windows 95/98
- For Windows XP/2000/NT 4.0:
Novell Client 4.8 or higher for Windows NT/2000/XP
You can choose either the Print Server, Remote Printer, or Standby mode. We recommend that you use the Print Server mode unless the number of users exceeds the limit.
Features of these modes are described below.
- High-speed printing with direct printing
- Uses the NetWare user account
- Can connect up to 8 file servers simultaneously
- Can register up to 32 print queues
- A NetWare user account is not required.
- A print server is needed to control the remote printer.
- Can attach up to 16 printers for NetWare 3.x, and up to 255 for NetWare 4.x or later.
Note: |
|
The Standby mode is the default mode. This mode disables all NetWare related functions. Use the Standby mode when you are not using the print server in a NetWare environment.
Previous |
Next |
Version NPD0133-03, Copyright © 2003, SEIKO EPSON CORPORATION |