|
|
How To / Installing and Removing Options
Installing a Duplex Unit
Removing a Duplex Unit
Installing the Duplex Unit enables duplex printing.
For information on the paper size and types supported by the Duplex Unit, see Paper Sources.
As an ENERGY STAR® partner, EPSON recommends the use of the double-sided printing function. Refer to ENERGY STAR® Compliance for more information on the ENERGY STAR® program.
Make sure the printer is turned off. |
Unplug the printer's power cord from the electrical outlet and from the printer. |
Remove all interface cables. |
Remove both covers from the printer's backside using the tool provided. |
Install the Duplex Unit. Hook the projections of the unit as shown. |
Secure the unit to the printer with the three screws provided. |
To verify that memory is correctly installed, print a status sheet. For instructions on how to print a status sheet, see the Setup Guide.
If the Duplex Unit is not listed on the status sheet, try reinstalling it.
To remove the unit, do the installation procedure in reverse order.
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |