Reference Guide

Index	Search	Glossary

Contents	Help

How to / Install and Remove Options

Memory Modules

By installing a memory module, you can increase printer memory up to 256 MB. You may want to add memory if you are having difficulty printing complex, graphics-intensive, pages, using the Duplex Unit or if you regularly use numerous downloaded fonts.

You can purchase memory modules form various vendors. Make sure the memory module you purchase meets the following requirements.

DRAM type	Synchronous Dynamic RAM Double In-line Memory Module (SD RAM DIMM)
Memory size	16 MB, 32 MB, 64 MB, 128 MB, or 256 MB
Type	168-pin type, 64 bit, with SPD
Access speed	66.66 MHz or higher (15 ns or less)
Height	Less than 40 mm

Note:

If you install an optional memory module, Installed Memory shows the total size including both default 16 MB and the optional module's size. However, if you install one 256 MB-DIMM, the status sheet shows just 256 MB because the maximum memory size for this printer is 256 MB.

For information on installing procedure for an optional memory module, see the Setup Guide.

[Top]