Reference Guide

Index
Search
Glossary
Contents
Help

How To / Paper Handling

Output Trays

Face-down tray
Face-up tray

There are two output trays for printed paper stacks: the face-down tray and the face-up tray.

Note:
The face-down tray is the default output tray. To select the face-up tray as the output tray, press the Face Up/Face Down button on the control panel.

Face-down tray

The face-down tray is located on the top of the printer. If you use the face-down tray, your printouts will be stacked facing down.

You can use the face-down tray with the following types of paper:

Paper type:

Plain paper (minimum 210 mm width x 182 mm length), EPSON Color Laser Paper, EPSON Color Laser Coated Paper

Capacity:

Up to 250 sheets

Caution:
The following paper cannot be used with the face-down tray. Use the face-up tray instead.
  • Plain paper smaller than 210 x 182 mm, such as A5 or Half-Letter size
  • EPSON Color Laser Transparencies
  • Thick paper


[Top]

Face-up tray

The face-up tray stacks your printouts with the printed surface facing up. This tray can be used for all types of paper supported by this printer.

Paper type:

All paper types supported by the EPSON AcuLaser C8600.

Capacity:

Up to 150 sheets (smaller than A4 size paper)
Up to 50 sheets (A4 or larger size paper)


[Top]


Previous

Next
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION