Reference Guide

Index	Search	Glossary

Contents	Help

Using the Control Panel / Using Advanced Copy Modes

Using the Join Pages Mode

The Join Pages mode allows you to copy two pages onto one sheet of paper. Follow the instructions in this section.

Note:

This mode cannot be used with the Split Pages mode.

When this mode is selected, you cannot change the zoom ratio or the paper source from the Ready to Copy screen.

Press the Join Pages button on the Select Advanced Mode screen.

Note:

If no button is pressed for more than 1 minute when in Join Pages mode, any changes made are canceled and the Ready to Copy screen appears with the original settings preserved.

The following screen appears if Join Pages is already set. Press the Setup button and go on to the next step.

Note:

Press the Clear button to clear the original setting.

Press the Exit button to exit this setting. The Ready to Copy screen appears.

Select the document size and its orientation on the document table.

Select a paper source. The size of the original document will automatically be reduced or enlarged so that two pages fit onto one sheet of the selected paper. See Zoom ratios in Join Pages mode for details.

Select the page layout that matches the page order of the original document. If the document page order is from left to right or from top to bottom, select the Odd -> Even setting. If the document page order is from right to left or from bottom to top, select the Even -> Odd setting.

When the document is placed horizontally on the document table, the Select Page Layout screen appears as follows:

When the document is placed vertically on the document table, the Select Page Layout screen appears.

Press the OK button to apply your settings and return to the Select Advanced Mode.

Place the first page of the document on the document table and press the start button. A progress meter appears on the touch screen while the page is being scanned, then instructions for scanning the next page of the document appear.

Place the next page of the document on the document table and press the start button. Repeat this procedure until all the pages have been scanned.

Zoom ratios in Join Pages mode

Output Paper Size	Document Size	Zoom Ratio	Results
A3	A3	A3 -> A4	Two pages of the original document are printed onto one A3 size sheet.
	B4	B4 -> A4
	A4	100%
	B5	B5 -> A4
B4	A3	A3 -> B5	Two pages of the original document are printed onto one B4 size sheet.
	B4	B4 -> B5
	A4	A4 -> B5
	B5	100%
A4	A3	A3 -> A5	Two pages of the original document are printed onto one A4 size sheet.
	B4	B4 -> A5
	A4	A4 -> A5
	B5	B5 -> A5
B5	A3	A3 -> B6	Two pages of the original document are printed onto one B5 size sheet.
	B4	B4 -> B6
	A4	A4 -> B6
	B5	B5 -> B6
Ledger	Ledger	B -> H-B	Two pages of the original document are printed onto one Ledger size sheet.
	Legal	LGL -> H-B
	Letter	LT -> H-B
	Executive	EXE -> H-B
Legal	Ledger	B -> H-LGL	Two pages of the original document are printed onto one Legal size sheet.
	Legal	LGL -> H-LGL
	Letter	LT -> H-LGL
	Executive	EXE -> H-LGL
Letter	Ledger	B -> 5.5 x 8.5	Two pages of the original document are printed onto one Letter size sheet.
	Legal	LGL -> 5.5 x 8.5
	Letter	LT -> 5.5 x 8.5
	Executive	EXE -> 5.5 x 8.5
Executive	Ledger	B -> H-EXE	Two pages of the original document are printed onto one Executive size sheet.
	Legal	LGL -> H-EXE
	Letter	LT -> H-EXE
	Executive	EXE -> H-EXE

[Top]