|
|
|
|||||||||||||||||||||||||||||||||
Product Information / Technical Specifications
High-speed tandem printing engine
The printer comes with a full set of features that contributes to ease of use and consistent, high-quality output. The main features are described below.
Your printer's state-of-the-art tandem engine features 400 MHz image processing and single-pass technology that delivers 24 ppm (pages per minute) at 600 dpi color and monochrome printing.
When using the driver provided, your printer does 600-dpi printing at a speed of up to 24 pages per minute when printing on A4 paper. You'll appreciate the professional print quality produced by your printer and its quick processing speed.
The printer warms up faster than conventional printers. About 30 seconds are required from power ON to when printing can be done at normal temperature. The time depends on the printer's optional configuration. Furthermore, if printing data is received in the sleep mode, printing will be started after a warm up time of about 30 seconds. When the temperature is low and humidity is high, about 300 seconds are required from power ON to when printing can be done.
This printer comes with a built-in duplex unit, allowing you to easily print on both sides of the page. You can produce professional quality double-sided documents. Use this feature with any print job to cut costs and save resources.
As an ENERGY STAR® partner, Epson recommends the use of the duplex printing function. See ENERGY STAR® Compliance for more information on the ENERGY STAR® program.
The Reserve Job function lets you store a print job on the printer's Hard Disk Drive and reprint it directly from the printer's control panel at any time without using your computer.
You can also print one copy in order to verify the content before printing multiple copies. If the content of the print job is confidential, you can set a password to limit access to it.
For Windows, see Using the Reserve Job Function for more information.
For Macintosh, see Using the Reserve Job Function for more information.
 | Note: |
 |
|
Enables faster printing with form overlays by allowing you to save the overlay data on the optional Hard Disk Drive instead of your computer. This feature is only available for Windows. For details, see Using HDD form overlay.
| Note: |
|
|
The printer driver offers many pre-defined settings for color printing, allowing you to optimize print quality for various types of color documents.
For Windows, see Making the print quality settings for more information.
For Macintosh, see Making the print quality settings for more information.
The printer comes with a selection of 80 Laser-Jet-compatible scalable fonts, and 3 bitmap fonts in LJ4 emulation mode to provide you with the fonts you need to create professional-looking documents.
To reduce the amount of toner used in printing documents, you can print rough drafts using the Toner Save mode.
Resolution Improvement Technology (RITech) is an original Epson printer technology that works by smoothing out the jagged edges of diagonal and curved lines in both text and graphics. Enhanced MicroGray improves the halftone quality of graphics. With the driver provided, the printer's 600 dpi (dots per inch) resolution is enhanced by RITech and Enhanced MicroGray technology.
The printer's Adobe PostScript 3 Mode provides you with the ability to print documents formatted for PostScript printers. Seventeen scalable fonts are included. IES (Intelligent Emulation Switch) and SPL (Shared Printer Language) support allow the printer to switch between the PostScript mode and other emulations as print data is received at the printer.
The P5C Emulation mode provides you with the ability to print documents in the PCL5c printing language with this printer. Installing this optional memory modules into your printer, this printer driver allows your computer to control the P5C printer.
 Next |
| Version NPD0750-00, Copyright © 2004, SEIKO EPSON CORPORATION |
