|
|
Problem Solver
The font selected in the application software will not print
Some or all of the printout is garbled
The position of the printout is not correct
Graphics don't print correctly
The printed surface is rough when duplex printing on coated paper
Cause | What to do |
You may use the printer fonts substituted for specified TrueType fonts. | In the printer driver, choose the Print TrueType fonts as bitmap radio button in the Extended Settings dialog box. |
The selected font is not supported by your printer. |
Make sure that you have installed the correct font. See Available Fonts for more information. |
Cause | What to do |
The interface cable may not be plugged in securely. | Make sure that both ends of the interface cable are plugged in securely. |
You may not be using the correct interface cable. | If you are using the parallel interface, make sure that the cable is a double-shielded, twisted-pair interface cable no more than six feet in length. If you are using the USB interface, use a Revision 1.1 compliant cable. |
The emulation setting for the port may not be correct. | Specify the emulation mode by using the printer's control panel menus. See Emulation Menu. |
Note: If a status sheet does not print correctly, your printer may be damaged. Contact your dealer or a qualified service representative. |
Cause | What to do |
The page length and margins are set incorrectly in your application. |
Make sure that you are using the correct page length and margin settings in your application. |
Cause | What to do |
The printer emulation setting in your application may be incorrect. | Make sure that your application is set for the printer emulation you are using. For example, if you are using the LJ4 emulation mode, make sure that your application is set to use a LaserJet 4 printer. |
You may need more memory. |
Graphics require large amounts of memory. Install an appropriate memory module. See Installing a memory module. |
Cause | What to do |
Duplex printing on damp coated paper may produce a rough printed surface. | Use coated paper that is newly unwrapped. Always store coated paper in a dry environment. |
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |