Administrator's Guide

Index
Search
Contents
Help

Settings for NetWare Server

Using the EpsonNet NDPS Gateway

Outline of settings
Installing EpsonNet NDPS Gateway on your NetWare server
Uploading printer driver files to the RMS
Creating an NDPS Manager
Creating a Printer Agent
Configuring for NetWare using EpsonNet WinAssist
Setting the printer on client workstations

This section contains instructions on printing using Novell Distributed Print Services® (NDPS®) with Novell® NetWare® 5.x/6.0. Novell Distributed Print Services (NDPS) is the new generation print services of NetWare.

Note:
  • Banners cannot be printed with NDPS.
  • The Status Monitor 3 utility cannot be used with NDPS.
  • Bind the IP or both IP or IPX protocols on the NetWare server that runs NDPSM.NLM and EPSONGW.NLM.

Check the following points before starting.

Outline of settings

The followings are basic steps to use the Internal Print Server with the NDPS printing system. Detailed procedures are described in the subsequent sections.

Install the EpsonNet NDPS Gateway.

Upload printer driver files to the NDPS RMS server.

Create an NDPS Manager object in NetWare Administrator.

Create a Printer Agent in NetWare Administrator.

Configure the Internal Print Server using EpsonNet WinAssist.

Set the printer on the client workstations.

The environment to use, the settings you make, and the tools to use differ depending on the printer type and connection type you choose. You can create an NDPS Manager and Printer Agent in NetWare Administrator or partially via the Server Console. See the Novell online documentation for more details.


[Top]

Installing EpsonNet NDPS Gateway on your NetWare server

You can install the EpsonNet NDPS Gateway from the software CD-ROM.

Note:
If an older version of the EpsonNet NDPS Gateway is already installed, be sure to unload the NDPS Manager before installing a new version of EpsonNet NDPS Gateway.

Open the NETUTIL folder.

Open the ENGW folder.

Double-click edps22**.exe.

Note:
The last two characters of the file name, represented by asterisks, vary depending on the place of purchase.

For detailed information on the EpsonNet NDPS Gateway, see the online guide on the software CD-ROM.


[Top]

Uploading printer driver files to the RMS

After installing the EpsonNet NDPS Gateway, you need to upload the printer driver to the Resource Management Service (RMS).

Run NetWare Administrator (NWADMN32.EXE) on the client machine. The main browser windows appears.

In the main NetWare Administrator browser, select EpsonNet NDPS DriverSetup from the Tool menu. The EpsonNet NDPS DriverSetup dialog box appears.

Browse for the target NDPS Broker if there are two or more Brokers in the tree you have logged in. The Browse button is not available if there is only one Broker in the tree you have logged in.

Browse for the Driver File location where the INF file is located. The desired printer drivers are listed in the Printers to be added box.

Click the Add All button to upload driver files for the listed printers to the RMS. Driver files for each OS are uploaded to RMS.

Repeat steps 4 and 5 until all the driver files for each Windows operating system (Windows Me/98/95/2000/NT 4.0) are uploaded.


[Top]

Creating an NDPS Manager

Run NetWare Administrator (NWADMN32.EXE) on the client machine. The main browser window appears.

To create an NDPS Manager, click the Directory context icon, and then select Create from the Object menu.

Select NDPS Manager from the list.

Enter the NDPS Manager name in the NDPS Manager Name field.

Browse the Resident Server and select where you want the NDPS Manager assigned.

Browse the Database Volume and select where you want the NDPS Manager database assigned.

Click Create. The NDPS Manager icon appears in the main browser window.

Type LOAD NDPSM at the server console, and then select the NDPS Manager you have created.


[Top]

Creating a Printer Agent

After creating an NDPS Manager, you can create Printer Agents, either public access printers or controlled access printers. The following are the features of public access printers and controlled access printers.

Note on using the Adobe PostScript 3 Kit:
If you want to use a printer as a PostScript and ESC/Page printer and want to install the printer driver automatically to the client computer, you must create two Printer Agents: one for the PostScript printer driver and the other for the ESC/Page printer driver. If you create one with Remote (rprinter on IPX), create the other with Remote (LPR on IP). You can create two Printer Agents with the LPR protocol (called LPR Printer Agent), but cannot create two Printer Agents with the IPX protocol (called IPX Printer Agent) for the same printer.

Creating a Printer Agent automatically

You can create a Printer Agent automatically. Only public access printers can be created in this way. See "Creating Public Access Printers Automatically" in the EpsonNet NDPS Gateway manual for detailed information.

Note on using the Adobe PostScript 3 Kit:
  • If the NetWare server is bound with both IP and IPX protocols, two Printer Agents (one being LPR Printer Agent and the other IPX Printer Agent) are created automatically. When you select one of the Printer Agents for the PostScript printer driver, select the other for the ESC/Page printer driver. The Printer Agent name cannot be changed, so be sure to remember which Printer Agent is associated with the PostScript or ESC/Page printer driver.
  • If the NetWare server is bound with only IP protocol, only one LPR Printer Agent is created. You need to create one more LPR Printer Agent manually. Be sure to select Remote (LPR on IP) for the port handler type and set a unique Printer Agent name so you can tell which Printer Agent is associated with the PostScript or the ESC/Page printer driver.
  • If the NetWare server is bound with only IPX protocol, only one IPX Printer Agent is created. In this case, you cannot create another IPX Printer Agent manually. To avoid this, be sure to bind both the IP and IPX protocols to the NetWare server first.

Creating a Printer Agent manually

You can create Printer Agents, either public access printers or controlled access printers. The way to create a Printer Agent differs depending on the printer type you choose.

Note on using the Adobe PostScript 3 Kit:
If you want to use a printer as a PostScript and ESC/Page printer and want to install the printer driver automatically to the client computer, you must create two Printer Agents: one for the PostScript printer driver and the other for the ESC/Page printer driver. If you create one with Remote (rprinter on IPX), create the other with Remote (LPR on IP). You can create two LPR Printer Agents but cannot create two IPX Printer Agents for the same printer.

Select a printer type (either public access printer or controlled access printer).

Create a public access printer. If you want to create a controlled access printer, go to step 3.

In NetWare Administrator, double-click the NDPS Manager you have created. Click Printer Agent List, and then click New. Type the Printer Agent name, and then select EpsonNet NDPS Gateway Configuration for the Gateway Type. Click OK. Then go to step 4.

Note on using the Adobe PostScript 3 Kit:
When you create two Printer Agents for the same printer, be sure to use names related to the printer driver type so you can tell which Printer Agent is associated with the PostScript or the ESC/Page printer driver.

Create a controlled access printer.

In NetWare Administrator, select the Directory context icon. Select Create from the Object menu, and then select NDPS Printer. Type the Printer Agent name, and then select Create a new Printer Agent, and then click Create. Select the NDPS Manager you have created, and then select EpsonNet NDPS Gateway Configuration for the Gateway Type. Click OK.

Note on using the Adobe PostScript 3 Kit:
When you create two Printer Agents for the same printer, be sure to use names related to the printer driver type so you can tell which Printer Agent is associated with the PostScript or the ESC/Page printer driver.

Select one of the following port handler type. Select Remote (LPR on IP) if you want to use the printer in IP network. Select Remote (rprinter on IPX) if you want to use the printer on an IPX network. Select Queue Based if you want to keep the NetWare NDS print server configuration of the Internal Print Server. Then click Next.

Note on using the Adobe PostScript 3 Kit:
If you have selected Remote (rprinter on IPX) for the first Printer Agent, be sure to select Remote (LPR on IP) for the second Printer Agent.

Configure it as described below. It is a good idea to print a network status sheet of the Internal Print Server and configure the corresponding items.

When you finish filling in the boxes, press Finish. Follow the on-screen instructions.

The Select Printer Drivers dialog box appears. Select an appropriate printer driver for Windows Me/98/95 and Windows 2000/NT 4.0. Be sure to select the correct printer driver for your printer from the appropriate menus. Windows 3.1 is not supported.

Click Continue.

Confirm the Printer Agent that you have just created.

In NetWare Administrator, double-click the NDPS Manager object and click Printer Agent List. Check that the status of the Printer Agent you have just created is "Idle".


[Top]

Configuring for NetWare using EpsonNet WinAssist

Follow the steps below if you want to use the printer in IPX network.

Note:
Be sure that the one of the following clients is installed on your computer: Novell Client 32, Novell IntranetWare Client, or Novell Client.

Turn on your printer.

From any NetWare client, log in to the target NetWare server as an ADMIN.

Run EpsonNet WinAssist from the Start menu. See Configuring Your Printer Using EpsonNet WinAssist for details.

If the IP address of the printer is already assigned, you can use EpsonNet WebAssist too. See NetWare for details.


[Top]

Setting the printer on client workstations

After configuring the print server, set up the printer on client workstations.

Installing printers automatically

Run the Novell Printer Manager from Windows. If you are running Windows Me/98/95/2000/NT, run:
\PUBLIC\WIN32\NWPMW32.EXE

In the Novell Printer Manager dialog, select New from the Printer menu.

Click Add. A list of available printers appears.

Select the printer you want and click Install.

The Novell Printers---Install dialog appears. You may modify the printer name that appears and select a pre-defined configuration.

Click OK. The printer driver for that printer model is installed automatically from the Resource Management Service.

Click Close. The printer appears in the main Printer Manager window and is available for print jobs.

Installing printers manually

Install the printer driver.

Change the Ports on the printer's properties dialog box. Specify the following objects for the port.

See the Novell online documentation for details.


[Top]


Previous

Next
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION