|
|
Network Software / EpsonNet WebAssist
NetWare
TCP/IP
AppleTalk
NetBEUI
IPP
SNMP
Items |
Explanations |
NetWare |
Enable or Disable NetWare. |
Frame Type |
Leave the default frame type (Auto) as it is. |
Mode |
Select the appropriate NetWare mode. |
Items |
Explanations |
Print Server Name |
Enter the print server name (up to 47 characters). |
Polling Interval |
Enter the polling interval in seconds. |
NetWare Password |
Enter the password (up to 20 characters) you use when you log in to the print server, if necessary. |
NDS Tree Name |
Enter the NDS tree name (up to 31 characters) if the mode is NDS Print Server. |
NDS Context |
Enter the NDS context (up to 255 characters) if the mode is NDS Print Server. |
Primary File Server Name |
If the mode is Bindery Print Server, enter the file server name (up to 47 characters) which the print server logs in. |
Items |
Explanations |
Primary Print Server Name |
Enter the primary print server name (up to 47 characters). |
Printer Port Number |
Enter the printer port number. |
SUBMIT button |
Saves any changes. |
Items |
Explanations |
Get IP Address |
Select a method for acquiring IP addresses. If Auto is selected, DHCP becomes available. To use the DHCP server, it must be installed in your computer and must be correctly configured. See your operating system's online help for detailed instructions. To set the IP address manually, select Manual. |
IP Address |
Enter an IP address for the Internal Print Server if set to Manual. Be sure to give an IP address which does not conflict with any other device on the network. |
Subnet Mask |
Set the subnet mask. |
Default Gateway |
Set the gateway address if needed. |
Use a private IP address when an IP address cannot be assigned by the DHCP server |
Select Enable to get the private address between 169.254.1.1 and 169.254.254.254 automatically when an IP address cannot be obtained by the DHCP server. |
Set by PING |
Enables or disables IP address setting using the ping command. |
Universal Plug and Play |
Enables or disables Universal Plug and Play. |
Universal Plug and Play Device Name |
Enter the device name (up to 63 characters). The first character of the device name must be an alphabet. |
SUBMIT button |
Saves any changes. |
Items |
Explanations |
AppleTalk |
Enable or Disable AppleTalk. |
Printer Name |
Enter the name of the printer attached to the Internal Print Server (up to 32 characters). |
Entity Type |
Displays the printer's entity type. Do not change the entity type unless "epson" is displayed. If "epson" is displayed, you need to enter the entity type to match the driver for the printer. |
Zone Name |
The zone is automatically selected when you enter "" for the Zone Name and select Auto for the Network Number Set. |
Network Number Set |
Select Auto or Manual. Usually Auto is recommended. |
Network Number for Manual Mode |
Enter the network number when you select to set the Network Number manually. |
SUBMIT button |
Saves any changes. |
Items |
Explanations |
NetBEUI |
Enable or Disable NetBEUI. |
NetBIOS Name |
Enter the printer's NetBIOS name which is the computer name on the network (up to 15 characters). Be sure to give a name that is unique on the network. |
Workgroup Name |
Enter the workgroup name or domain name (up to 15 characters). |
Device Name |
Enter the device name (up to 12 characters). LPT1, LPT2, or LPT3, or COM cannot be used. |
SUBMIT button |
Saves any changes. |
You must make the following settings before setting up the printer for Internet Printing in Windows Me/2000 or using EpsonNet Internet Print in Windows 98/95/NT 4.0. See About EpsonNet Internet Print for more information.
Items |
Explanations |
IPP URL |
Displays the printer's URL for Internet Printing.
Format:
Example: |
Printer Name |
Enter the printer name to use for Internet Printing (up to 127 characters).
Example: |
Location |
Enter the name of the printer's physical location (up to 64 characters). |
SUBMIT button |
Saves any changes. |
Items |
Explanations |
Community |
Displays the community name. |
Read Only |
The word "public" is always displayed. |
Read/Write |
Enter the Read/Write community name (up to 32 characters). |
SUBMIT button |
Saves any changes. |
Items |
Explanations |
Trap |
Enable or Disable the trap. |
Address |
Enter the IP address of the server to which the trap is transmitted. |
Community Name |
Enter the community name (up to 32 characters). |
SUBMIT button |
Saves any changes. |
Items |
Explanations |
Trap |
Enable or Disable the trap. |
Address |
Enter the Network Address and Node Number (MAC Address) of the server to which the trap is transmitted.
Format: Assume that the Network Address is A7E00BB0 (hexadecimal) and Node Number is 000048930000 (hexadecimal). In this case, the address is A7E00BB0:000048930000. |
Community Name |
Enter the community name (up to 32 characters). |
SUBMIT button |
Saves any changes. |
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |