Reference Guide

Index	Search	Glossary

Contents	Help	Safety

Product Information / Technical Specifications

Printer

General
Environmental
Mechanical
Electrical
Standard and approvals

General

Printing method:	Laser beam scanning and dry electrophotographic process
Resolution:	600 dpi, 300dpi
Continuous printing speed* (with A4/Letter):	24 pages per minute or less
First print (with A4/Letter):	Less than 13.2 seconds from the MP tray Less than 13.5 seconds from the standard lower cassette
Warm-up time:	About 30 seconds at normal temperature
Paper feed:	Automatic or manual feed
Paper feed alignment:	Center alignment for all sizes
Duplex	Available paper types are A4, A5, B5, LT, GLG, LGL and EXE of plain paper, EPSON Color Laser Paper
Input paper supply:
MP tray:	Up to 100 sheets of plain paper, EPSON Color Laser Paper Up to a 10 mm thick stack of envelopes, labels, thick paper, and transparencies
Standard paper cassette:	Up to 500 sheets of plain paper, EPSON Color Laser Paper
Paper output capacity:	Up to 250 sheets of plain paper, EPSON Color Laser Paper
Internal emulation:	HP listed LaserJet 4 emulation (LJ4 mode)
	HP-GL/2 emulation (GL2 mode)
	ESC/P2 24-pin printer emulation (ESCP2 mode)
	ESC/P 9-pin printer emulation (FX mode)
	IBM Proprinter emulation (I239X mode)
Resident fonts:	84 scalable fonts, and 7 bitmap fonts
RAM:	64 MB, expandable up to 1024 MB (To increase printer memory to more than 576 MB, you have to remove the original 64 MB DIMM and install two optional DIMMs.)

[Top]

Environmental

Temperature:	In use:	10 to 32°C (50 to 89.6°F)
	Not in use:	-20 to 40°C (4 to 104°F)
Humidity:	In use:	15 to 85% RH
	Not in use:	5 to 85% RH
Altitude:	3,100 meters (10,170 feet) maximum

[Top]

Mechanical

Dimensions and weight:	Height:	44.5 cm (17.5 in.)
	Width:	43.9cm (17.3 in.)*
	Depth:	63.8 cm (25.1 in.)
	Weight:	Approx. 29.8 kg (65.7 lb) without consumables installed
	*When extending all trays, 72.9 cm (28.7 in.)
Durability:	5 years or 600,000 pages, whichever comes first

[Top]

Electrical

			110 V to 120 V Model (Model KAA-3)	220 to 240 V Model (Model KAB-2)
Voltage			110 V-120 V ± 10%	220 V-240 V ± 10%
Rated frequency			50 Hz / 60 Hz ± 3 Hz	50 Hz / 60 Hz ± 3 Hz
Rated current			Less than 8 A	Less than 4 A
Power consumption	During printing*	Maximum	900 W	900 W
		Average	600 Wh	600 Wh
	During standby mode Average		180 Wh	180 Wh
	Sleep mode		Less than 45 Wh	Less than 45 Wh

* Includes optional cassette unit.

[Top]

Standard and approvals

U.S. model:

Safety	UL 60950 CSA No.60950
EMC	FCC Part 15 Subpart B Class B CSA C108.8 Class B

European model:

Low Voltage Directive 73/23/EEC
EMC Directive 89/336/EEC

EN 60950
EN 55022 Class B
EN 55024
EN 61000-3-2
EN 61000-3-3

Australian model:

EMC	AS/NZS 3548 Class B

Laser safety

This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation.

Since radiation emitted by the laser is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.

CDRH regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.

[Top]