Sharing the printer
Setting up your printer as a shared printer
Using an additional driver
Setting up clients
Installing the printer driver from the CD-ROM

This section describes how to share the printer on a standard Windows network.

The computers on a network can share a printer that is directly connected to one of them. The computer that is directly connected to the printer is the print server, and the other computers are the clients which need permission to share the printer with the print server. The clients share the printer via the print server.

According to the versions of Windows OS and your access rights on the network, perform the appropriate settings of the print server and clients.

Setting the print server

• For Windows Me or 98, see Setting up your printer as a shared printer.

• For Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64, see Using an additional driver.

Setting the clients

• For Windows Me or 98, see With Windows Me or 98.

• For Windows XP, XP x64, or 2000, see With Windows XP, XP x64, or 2000.

Note:

When sharing the printer, be sure to set EPSON Status Monitor so that the shared printer can be monitored on the print server. See Notice Settings. When you are using shared printer in a Windows Me or 98 environment, on the server, double-click the Network icon in Control panel and make sure that the “File and printer sharing for Microsoft Networks” component is installed, then on the server and clients, make sure that the “IPX/SPX-compatible Protocol” or the “TCP/IP Protocol” is installed. The print server and clients should be set on the same network system, and they should be under the same network management beforehand.

Top

When the print server’s OS is Windows Me or 98 follow the steps below to set the print server.

Click Start, point to Settings, then click Control Panel.

Double-click the Network icon.

Click File and Print Sharing on the Configuration menu.

Select the I want to be able to allow others to print to my printer(s). check box, then click OK.

Click OK to apply the settings.

Note:

When “Insert the Disk” appears, insert the Windows Me or 98 CD-ROM in the computer. Click OK, then follow the on-screen instructions. When the prompt to restart the computer appears, restart the computer, then continue with the settings.

Double-click the Printers icon on the control panel.

Right-click your printer’s icon, then click Sharing in the menu that appears.

Select Shared As, type the name in the Share Name box, then click OK. Type a Comment and Password if needed.

Note:

Do not use spaces or hyphens for the share name, or an error may occur. When sharing the printer, be sure to set EPSON Status Monitor so that the shared printer can be monitored on the print server. See Notice Settings.

You need to set the client computers so that they can use the printer on a network. See the following pages for details:

• With Windows Me or 98

• With Windows XP, XP x64, or 2000

Top

When the print server’s OS is Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64, you can install the additional drivers on the server. The additional drivers are for client computers that have different OS from the server.

Follow the steps below to set a Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64 as a print server, then install the additional drivers.

Note:

You must access Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64 as the Administrators of the local machine.

For a Windows 2000 print server, click Start, point to Settings, then click Printers. For a Windows XP, XP x64, Server 2003, or Server 2003 x64 print server, click Start, point to Printers and Faxes.

Right-click your printer’s icon, then click Sharing in the menu that appears.

For Windows XP, XP x64, Server 2003, or Server 2003 x64, if the following menu appears, click either Network Setup Wizard or If you understand the security risks but want to share printers without running the wizard, click here.
In either case, follow the on-screen instructions.

For a Windows 2000 print server, select Shared as, then type the name in the Share Name box.

For a Windows XP, XP x64, Server 2003, or Server 2003 x64 print server, select Share this printer, then type the name in the Share name box.

Note:

Do not use spaces or hyphens for the Share name, or an error may occur.

Select the additional drivers.

Note:

If the computers of the server and clients use the same OS, you do not have to install the additional drivers. Just click OK after step3.

On the Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64 print server

Click Additional Drivers.

Select Windows being used for clients, then click OK.

Server Name	Client OS	Driver
Windows 2000	Windows Me or 98 clients	Intel Windows 95 or 98
	Windows XP or 2000 clients	Intel Windows 2000
Windows XP*	Windows Me or 98 clients	Intel Windows 95, 98 and Me
	Windows XP or 2000 clients	Intel Windows 2000 or XP
	Windows XP x64 clients	x64 Windows XP
Windows XP x64, Server 2003, or Server 2003 x64*	Windows Me or 98 clients	x86 Windows 95, Windows98, and Windows Millennium Edition
	Windows XP or 2000 clients	x86 Windows 2000, Windows XP and Windows Server 2003
	Windows XP x64 clients	x64 Windows XP and Windows Server 2003

^* The additional driver for Windows XP x64 and Server 2003 x64 can be used on Windows XP Service Pack 2, Windows 2003 Service Pack 1, or later.

Note:

You do not have to install the additional drivers noted below, because these drivers are preinstalled. Intel Windows 2000 (for Windows 2000) Intel Windows 2000 or XP (for Windows XP) x86 Windows 2000, Windows XP and Windows Server 2003 (for Windows Server 2003) x64 Windows XP and Windows Server 2003 (for Windows XP x64 or Windows Sever 2003 x64 edition) Do not select additional drivers other than the drivers listed in the above table. The other additional drivers are not available.

Top

This section describes how to install the printer driver by accessing the shared printer on a network.

Note:

To share the printer on a Windows network, you need to set the print server. For details, see Setting up your printer as a shared printer (Windows Me or 98) or Using an additional driver (Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64). This section describes how to access the shared printer on a standard network system using the server (Microsoft workgroup). If you cannot access the shared printer due to the network system, ask the administrator of the network for assistance. This section describes how to install the printer driver by accessing the shared printer from the Printers folder. You can also access the shared printer from Network Neighborhood or My Network on the Windows desktop. You cannot use the additional driver on the server system OS. When you want to use EPSON Status Monitor at a client, you have to install EPSON Status Monitor from the CD-ROM with administrator privileges in each client.

Follow the steps below to set Windows Me or 98 clients.

Click Start, point to Settings, then click Printers.

Double-click the Add Printer icon, then click Next.

Select Network printer, then click Next.

Click Browse, and the Browse for Printer dialog box appears.

Note:

You can also type “\\(the name of the computer that is locally connected to the shared printer)\(the shared printer’s name)” in the network path or queue name.

Click the computer or server that is connected to the shared printer, and the name of the shared printer, then click OK.

Note:

The name of the shared printer may be changed by the computer or server that is connected to the shared printer. To make sure of the name of the shared printer, ask the administrator of the network.

Click Next.

Note:

If the printer driver is installed in the client beforehand, you need to select the new printer driver or the current printer driver. When the prompt to select the printer driver appears, select the printer driver according to the message. If the print server’s OS is Windows Me or 98 or the additional driver for Windows Me or 98 is installed in the Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64 print server, go to the next step. If the additional driver for Windows Me or 98 is not installed in the Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64 print server, go to Installing the printer driver from the CD-ROM.

Make sure of the name of the shared printer, then select whether to use the printer as the default printer or not. Click Next, then follow the on-screen instructions.

Note:

You can change the shared printer’s name so that it appears only on the client computer.

Follow the steps below to set Windows XP, XP x64, or 2000 clients.

You can install the printer driver for the shared printer, if you have Power Users or more powerful access rights even if you are not the Administrator.

For Windows 2000 clients, click Start, point to Settings, and click Printers. For Windows XP or XP x64 clients, click Start, point to Printers and Faxes.

For Window 2000, double-click the Add Printer icon, then click Next. For Windows XP or XP x64 click Add a printer in the Printer Tasks menu.

For Windows 2000, select Network printer, then click Next. For Windows XP or XP x64, select A network printer, or a printer attached to another computer, then click Next.

For Windows 2000, type the name of the shared printer, then click Next.

Note:

You can also type “\\(the name of the computer that is locally connected to the shared printer)\(the shared printer’s name)” in network path or queue name. You do not necessarily need to type the name of the shared printer.

For Windows XP or XP x64, select Browse for a printer.

Click the icon of the computer or server that is connected to the shared printer, and the name of the shared printer, then click Next.

Note:

The name of the shared printer may be changed by the computer or server that is connected to the shared printer. To make sure of the name of the shared printer, ask the administrator of the network. If the printer driver is installed in the client beforehand, you need to select either the new printer driver or the current printer driver. When the prompt to select the printer driver appears, select the printer driver according to the message. If the additional driver for Windows XP, XP x64, or 2000 is installed in the Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64 print server, go to the next step. If the print server’s OS is Windows Me or 98, go to Installing the printer driver from the CD-ROM.

Select whether to use the printer as the default printer or not, then click Next.

Make sure of the settings, then click Finish.

Top

This section describes how to install the printer driver in the clients when setting the network system as follows:

• The additional drivers are not installed in the Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64 print server.

• The print server’s OS is Windows Me or 98 and the client’s OS is Windows XP, XP x64, or 2000.

The on-screen displays on the following pages may differ depending on the version of Windows OS.

Note:

When installing in Windows XP, XP x64, or 2000 clients, you must access Windows XP, XP x64, or 2000 as the Administrator. If the additional drivers are installed or the computers of the server and clients use the same OS, you do not have to install the printer drivers from the CD-ROM.

Access the shared printer and a prompt may appear. Click OK, then follow the on-screen instructions to install the printer driver from the CD-ROM.

Insert the CD-ROM, type the appropriate drive and folder names in which the printer driver for clients is located, then click OK.

When installing drivers in Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64, “Digital Signature is not found.” may appear. Click Yes (for Windows 2000) or Continue Anyway (for Windows XP, XP x64, Server 2003, or Server 2003 x64) and continue installing.

The folder name differs depending on the OS being used.

Client’s OS	Folder Name
Windows Me or 98	\<Language>\WIN9X
Windows 2000 or XP	\<Language>\WINXP_2K
Windows XP x64	\<Language>\WINXP64

Select the name of the printer, click OK, then follow the on-screen instructions.

Top