|
|
Product Information / Technical Specifications
Parallel interface
USB interface
Ethernet interface
Use the IEEE 1284-I compliant parallel interface connector.
To use ECP mode with a parallel (IEEE 1284 level I compliant) interface connector, your computer must support ECP mode.
The procedure of the mode setting on the parallel interface may differ depending on your computer. Refer to your computer's manual to adjust the mode setting on the parallel interface.
USB 1.1
Note: |
|
You can use an IEEE 802.3 100BASE-TX/10BASE-T straight-through shielded, twisted-pair interface cable with the RJ45 connector.
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |