|
|
Product Information / Technical Specifications
General
Environmental
Mechanical
Electrical
Standards and approvals
Printing method: |
Laser beam scanning and dry electrophotographic process |
Resolution: |
600 x 600 dpi, 300 x 300 dpi |
Continuous printing speed (with A4/Letter) |
Printing speed varies by paper source or other conditions. |
Color printing: |
4 pages per minute or more |
Black only printing: |
16 pages per minute or more |
First print |
Printing speed varies by paper source or other conditions. |
Color printing: |
25 seconds or less |
Black only printing: |
14 seconds or less |
Warm-up time: |
About 180 seconds at normal temperature |
Paper feed: |
Automatic or manual feed |
Paper feed alignment: |
Center alignment for all sizes |
Input paper supply: |
|
MP tray: |
Up to 200 sheets of plain paper and EPSON Color Laser Paper |
Optional 500-Sheet Paper Cassette Unit: |
Up to 500 sheets of plain paper and EPSON Color Laser Paper |
Optional Duplex Unit: |
A4 or Letter |
Paper output: |
For all paper types and size |
Paper output capacity: |
Up to 200 sheets (A4 or letter size plain paper) |
Internal emulation: |
PCL5e mode (LJ4 mode) |
|
HP-GL/2 emulation (GL2 mode) |
|
ESC/P 2 24-pin printer emulation |
|
ESC/P 9-pin printer emulation (FX mode) |
|
IBM Proprinter emulation (I239X mode) |
Resident fonts: |
84 scalable fonts, and 7 bitmap fonts |
RAM: |
32 MB, expandable up to 1 GB To increase printer memory to 544 MB or more, you have to remove the original 32MB RAM. |
Temperature: |
Operation: |
10 to 35 °C (50 to 95°F) |
|
Storage: |
0 to 35 °C (32 to 95 °F) |
Humidity: |
Operation: |
15 to 85% RH |
|
Storage: |
10 to 85% RH |
Altitude: |
2,500 meters (8,200 feet) maximum |
Dimensions and weight: |
Height: |
406 mm (16.0 in.) |
|
Width: |
429 mm (16.9 in.) |
|
Depth: |
521 mm (20.5 in.) |
|
Weight: |
Approx. 29 kg (about 63.9 lb), excluding options |
Durability: |
5 years or 200,000 pages, whichever comes first |
|
110 V/120 V Model |
220 to 240 V Model |
|||
Voltage |
110 V-120 V ± 10% |
220 V-240 V ± 10% |
|||
Rated frequency |
50 Hz / 60 Hz ± 3 Hz |
50 Hz / 60 Hz ± 3 Hz |
|||
Rated current |
Less than 11 A |
Less than 7A |
|||
Power consumption |
During printing* |
Average |
Color |
247Wh |
251Wh |
B/W |
372Wh |
352Wh |
|||
MAX |
Color |
1100W or less |
|||
B/W |
1100W or less |
||||
During standby mode |
Average |
108Wh |
107Wh |
||
Sleep mode** |
Less than 15Wh |
Less than 12Wh |
* Includes optional cassette unit and Duplex Unit. |
** Completely suspended. Compliant with the Energy Star program. |
U.S. model:
Safety |
UL 60950 |
EMC |
FCC Part 15 Subpart B Class B |
European model:
Low Voltage Directive 73/23/EEC |
EN 60950 |
Australian model:
EMC |
AS/NZS 3548 Class B |
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. Compliance is mandatory for products marketed in the United States. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.
Previous |
Next |
Version 1.00E, Copyright © 2002, SEIKO EPSON CORPORATION |