Reference Guide

Index Search Glossary Contents Help

Paper Handling

Printing on Special Media

EPSON Color Laser Paper
EPSON Color Laser Transparencies
EPSON Color Laser Coated Paper
Envelopes
Labels
Thick paper and extra thick paper
Transparencies
Loading a custom paper size

You can print on special media which include an assortment of Epson paper such as the following.

Note:

Since the quality of any particular brand or type of media may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any type of media. Always test samples of media stock before purchasing large quantities or printing large jobs.

EPSON Color Laser Paper

When loading EPSON Color Laser Paper, you should make paper settings as shown below:

• Make settings on the Basic Settings in the printer driver.

Note:

When printing on the back side of previously printed paper, select Semi-Thick (Back).

• You can also make these settings on the Tray Menu in the control panel. See Tray Menu.

[Top]

EPSON Color Laser Transparencies

Epson recommends the use of EPSON Color Laser Transparencies.

Note:

Duplex printing is not available for transparencies.

Transparencies can be loaded into the MP tray only. When using transparencies, you should make paper settings as shown below:

• Make settings on the Basic Settings in the printer driver.

• You can also make these settings on the Tray Menu in the control panel. See Tray Menu.

Please note the following when handling this media:

• Hold each sheet by its edges, as oil from your fingers may transfer to the surface and damage the printable surface of the sheet. The Epson logo appears on the printable side.

• When loading transparencies in the MP tray, insert the short edge first as shown below.

• If transparencies are loaded incorrectly, the message Check Transparency appears on the LCD panel. Remove the jammed transparencies from the printer. To clear the jam, see When transparencies are jammed at the MP tray.

• When using transparencies, load them in the MP tray and set the Paper Type setting to Transparency in the printer driver.

• When the Paper Type setting in the printer driver is set to Transparency, do not load any other type of paper except transparencies.

Caution:

Sheets that have just been printed on may be hot.

[Top]

EPSON Color Laser Coated Paper

Printing on EPSON Color Laser Coated Paper produces glossier and higher quality printouts. When loading EPSON Color Laser Coated Paper, you should make paper settings as shown below:

• Make settings on the Basic Settings in the printer driver.

Note:

When printing on the back side of previously printed paper, select Coated (Back).

• You can also make these settings on the Tray Menu in the control panel. See Tray Menu.

[Top]

Envelopes

The print quality of envelopes may be irregular because different parts of an envelope have different thicknesses. Print one or two envelopes to check the print quality.

Caution:

Do not use window envelopes. The plastic on most window envelopes will melt when it comes into contact with the fuser.

Note:

Depending on the quality of envelopes, the printing environment, or the printing procedure, envelopes might be wrinkled. Make a trial print run before you print on a lot of envelopes.

Duplex printing is not available for envelopes.

When loading envelopes, you should make paper settings as shown below:

• Make settings on the Basic Settings menu in the printer driver.

• You can also make these settings on the Tray Menu in the control panel. See Tray Menu.

Please note the following when handling this media.

• Load envelopes with the printable side up, as shown below.

a. MON
b. C6, DL
c. C5, IB5
d. C10

• Do not use an envelope that has glue or tape on it.

[Top]

Labels

You can load up to 75 sheets of labels into the MP tray at one time. However, you may need to feed some labels one sheet at a time, or load them manually.

Note:

Duplex printing is not available for labels.

Depending on the quality of labels, the printing environment, or the printing procedure, labels might be wrinkled. Make a trial print run before you print on a lot of labels.

When loading labels, you should make paper settings as shown below:

• Make settings on the Basic Settings menu in the printer driver.

• You can also make these settings on the Tray Menu in the control panel. See Tray Menu.

Note:

You should only use labels designed for laser printers or plain-paper copiers.

To prevent the label adhesive from coming into contact with printer parts, always use labels that completely cover the backing sheet, with no gaps between the individual labels.

Press a sheet of paper on top of each sheet of labels. If the paper sticks, do not use those labels in your printer.

[Top]

Thick paper and extra thick paper

You can load thick paper (106 to 163 g/m²) or extra thick paper (164 to 210 g/m²) into the MP tray.

When loading thick or extra thick paper, you should make paper settings as shown below:

• Make settings on the Basic Settings menu in the printer driver.

• You can also make these settings on the Tray Menu in the control panel. See Tray Menu.

Note:

When using thick and extra thick paper, you cannot do duplex printing automatically. When you want to do duplex printing with thick paper, set the Paper Type setting on the printer driver to Thick (Back), Extra Thick (Back) or Thick, Extra Thick, then do the duplex printing manually.

[Top]

Transparencies

When loading transparencies, you should make paper settings as shown below:

• Make settings on the Basic Settings menu in the printer driver.

• You can also make these settings on the Tray Menu in the control panel. See Tray Menu.

[Top]

Loading a custom paper size

You can load non-standard size paper (90 x 110 mm to 220 x 297 mm) into the MP tray as long as it meets the following size requirements:

When loading a custom paper size, you should make paper settings as shown below:

• Make settings on the Basic Settings menu in the printer driver.

Note:

For Windows, access the printer driver, then select User-Defined Size from the Paper Size list on the Basic Settings menu. In the User Defined Paper Size dialog box, adjust the Paper Width, Paper Length, and Unit settings to match your custom paper. Then click OK and your custom paper size will be saved.

For Macintosh, access the printer driver, click Custom Size in the Paper Setting dialog box. Then click New, adjust the Paper Width, Paper Length, and Margin settings to match your custom paper. Then enter the setting's name, and click OK to save your custom paper size.

• You can also make these settings on the Tray Menu in the control panel. See Tray Menu.

[Top]

Previous