User's Guide

Index	Search	Glossary

Contents	Help	Safety

Options and Consumable Products

Options

Roll paper spindle
Auto Take-Up Reel Unit
Manual Cutter Unit
Interface card
Interface cable

The following options are available for use with your printer.

Note:

The availability of options and consumable products varies by location.

Roll paper spindle

To use optional spindles, see Using Roll Paper.

2/3 inch Dual Roll Feed Spindle (for Stylus Pro 9800/9400)	C12C811151
2/3 inch Dual Roll Feed Spindle (High Tension) (for Stylus Pro 9800/9400)	C12C811152
2/3 inch Dual Roll Feed Spindle (for Stylus Pro 7800/7400)	C12C811161
2/3 inch Dual Roll Feed Spindle (High Tension) (for Stylus Pro 7800/7400)	C12C811155

[Top]

Auto Take-Up Reel Unit

This option is for Stylus Pro 9800/9400 only.
This option takes up your printed roll paper documents automatically. The unit contains the Take-Up Reel Core, a drive unit and movable unit which are attached to the printer, and drafting tape. To install and use this option, see the optional Auto Take-Up Reel Unit User's Guide.

Auto Take-Up Reel Unit

C12C815251

[Top]

Manual Cutter Unit

This option helps you cut your printed roll paper manually. To install and use the cutter, see the attached manual.

Manual Cutter Unit (for Stylus Pro 9800/9400)
Manual Cutter Unit (for Stylus Pro 7800/7400)
Manual Cutter Spare Blade

C12C815182
C12C815231
C12C815192

[Top]

Interface card

To install optional interface card, see the Unpacking and Setup Guide.

EpsonNet 10/100 Base Tx Int. Print Server 5

C12C82434

Note:

The asterisk () is a substitute for the last digit of the product code, which varies by location.

[Top]

Interface cable

IEEE 1394 Cable 2.9 m

C12C836321

[Top]