Reference Guide

Index
Search
Glossary
Contents
Help

Maintenance and Transportation

Replacing the Maintenance Tank

If MNT TNK FULL or MNT TK NEAR FULL appears on the LCD, replace the maintenance tank.

To check the product code of the Maintenance Tank, see Consumable Products.

To replace the maintenance tank, follow the steps below.

For EPSON Stylus Pro 4800 only:
If you are using 220 ml ink cartridges, remove the four ink cartridges from the right ink compartment. Make sure to close the ink compartment cover after you have removed the ink cartridges.

Open the package of a new maintenance tank.

Put your hand on the handle under the right ink compartment, then gently pull the maintenance tank outward.

Put the used maintenance tank in the plastic bag provided.

Note:
Do not tilt the used maintenance tank until after it is sealed in the plastic bag.

Insert the new maintenance tank into place.

For EPSON Stylus Pro 4800 only:
If you are using 220 ml ink cartridges, reinstall the removed ink cartridges.


[Top]


Previous

Next
Version NPD1123-00, Copyright © 2005, SEIKO EPSON CORPORATION