|
|
Various Printing Options
Paper loading
Driver settings for Windows
Driver settings for Mac OS 8.6 or 9.x
Driver settings for Mac OS X
Pages Per Sheet Printing allows you to print two or four pages on single sheets of paper.
Note: |
|
Load paper in your printer.
Loading Single Sheets |
Access the printer driver. |
Accessing the Printer Software for Windows |
Select the desired Type setting under Paper Options on the Main menu. |
Media Type Settings |
Select Sheet under Paper Options on the Main menu. |
Select the desired Size setting for the original print data under Paper Options on the Main menu. |
Select Pages Per Sheet as the Multi-Page setting on the Page Layout menu. |
Make the following settings for Pages Per Sheet Printing. |
2, 4 |
Prints two or four pages of your document on a single piece of paper. |
Print Page Borders |
Prints frames around the pages printed on each sheet. |
Page Order |
Allows you to specify the order in which the pages will be printed on the sheet of paper. Some settings may be unavailable, depending on the Orientation setting on the Main menu. |
Click OK to close the driver setting dialog. |
After finishing all of the above steps, start printing.
Access the printer driver. |
Accessing the Printer Software for Macintosh |
Select the desired Paper Size setting for the original print data in the Page Setup dialog box. |
Select Auto Sheet Feeder as the Paper Source setting. |
Click OK to save the setting and close the dialog box. |
Select the desired Media Type setting in the Print dialog box. |
Media Type Settings |
Select the Multi-Page check box in the Layout dialog box, and then select Pages per Sheet. |
Make the following settings for Pages per Sheet printing. |
2 Pages, 4 Pages |
Prints two or four pages of your document on a single piece of paper. |
Page Order |
Allows you to specify the order in which the pages will be printed on the sheet of paper. Some settings may be unavailable, depending on the Orientation setting in the Page Setup dialog box. |
Print page frames |
Prints frames around the pages printed on each sheet. |
Click OK to save the setting and close the dialog box. |
Click Print to start printig. |
Access the printer driver. |
Accessing the Printer Software for Macintosh |
Select the desired Paper Size setting for the original print data in the Page Setup dialog box. |
Select Print Settings from the pop-up menu in the Print dialog box, and then select the desired Media Type setting. |
Media Type Settings |
Choose Layout from the pop-up menu in the Print dialog box. |
Make the following settings for Layout. |
Pages per Sheet |
Prints multiple pages of your document on a single piece of paper. You can choose from 1, 2, 4, 6, 9, or 16. |
Layout Direction |
Allows you to specify the order in which the pages will be printed on the sheet of paper. |
Border |
Prints a border around the pages printed on each sheet. You can choose from None, Single hairline, Single thin line, Double hairline, or Double thin line. |
After finishing all of the above steps, start printing.
Note: |
|
Previous |
Next |
Version 1.00E, Copyright © 2003, SEIKO EPSON CORPORATION |