|
|
How To / Replacing Ink Cartridges
For Windows users
For Macintosh users
You can check the amount of ink remaining in the ink cartridges using EPSON Status Monitor 3 or the Progress Meter. Refer to the appropriate section below for details.
Access EPSON Status Monitor 3 in the following way.
Open the printer software, click the Utility tab, then click the EPSON Status Monitor 3 button.
A graphic display showing the amount of ink remaining appears.
Note: |
If any one of the ink cartridges that are installed in the printer is broken, incompatible to the printer model, or is installed improperly, the EPSON Status Monitor 3 will not display an accurate calculation for the amount of ink remaining in any of the ink cartridges. Be sure to replace or reinstall any ink cartridge when indicated by the Epson Status Monitor 3. |
The Progress Meter dialog box appears automatically when you send a print job to the printer. You can check the amount of ink remaining from this dialog box.
You can check the amount of ink remaining in the ink cartridges using the StatusMonitor. Follow the steps below.
Click Print or Page Setup on the File menu of your application. The Print dialog box appears. |
Click the Utility icon button, then click the EPSON StatusMonitor button in the Utility dialog box. |
A graphic displaying the amount of ink remaining will appear.
Note: |
|
|
Previous |
Next |
Version 1.10E, Copyright © 2002, SEIKO EPSON CORPORATION |