Reference Guide

Index
Search
Glossary
Contents
Help

Various Printing Options

Printing on Envelopes

Loading envelopes
Printing on envelopes

When printing on envelopes, note the following:

Note:
The folding quality and thickness of envelopes varies widely. If the total thickness of the stack of envelopes exceeds 10 mm, press each envelope in the stack flat before loading. If print quality declines when a stack of envelopes is loaded, load one envelope at a time.

A:

The minimum top margin is 3.0 mm (0.12 in.).

B-L:

The minimum left margin is 3.0 mm (0.12 in.).

B-R:

The minimum right margin is 3.0 mm (0.12 in.).

C:

The minimum bottom margin is 14 mm (0.78 in.).

:

You can extend the minimum bottom margin to 3 mm by selecting Maximum as the Printable Area setting on the printer software's Paper menu (Windows) or in the Page Setup dialog box (Macintosh). However, print quality may decline in the expanded area.

Loading envelopes

Refer to the section below.

Loading Envelopes


[Top]

Printing on envelopes

Access the printer driver.
Accessing the Printer Software for Windows
Accessing the Printer Software for Macintosh

Select Plain Paper as the Media Type setting on the Main menu (Windows) or in the Print dialog box (Macintosh).

Select the appropriate envelope size from the available Paper Size settings on the Paper menu (Windows) or in the Page Setup dialog box (Macintosh).

Select Landscape as the Orientation setting.

Click OK to close the driver settings dialog box.

Print your data.

Note:
The Economy Custom mode and the Economy setting under Print Quality in the Advanced dialog box are not available when printing envelopes.


[Top]


Previous
Version 2.00E, Copyright © 2002, SEIKO EPSON CORPORATION