User's Guide
|
|
Other Information
Paper Handling Instructions
When storing printouts
When storing unused paper
When displaying printouts
When storing printouts
-
Do not touch the printed side or stack your printouts until the ink is dry.
-
To avoid scratching the image, be sure not to rub the printed side of the paper. If the printed side is rubbed too strongly, ink may come off the paper.
-
Do not stack printouts with the image sides touching.
-
Do not stack printouts and conventional film photographs with the image sides touching.
-
If you stack printouts, place a sheet of plain paper or other absorbent paper between the individual prints.
[Top]
When storing unused paper
Return any unused paper to the original package, and store it away from extreme temperatures, high humidity, and bright lights.
[Top]
When displaying printouts
-
When displaying your printouts indoors, Epson recommends placing your printouts in glass frames to preserve the colors in your image.
-
Avoid displaying your printouts outdoors or in a place exposed to direct sunlight to prevent fading.
|
Note:
|
|
For best results, allow your prints to dry thoroughly for 24 hours before framing.
|
|
[Top]
Version NPD1122-00, Copyright © 2005, SEIKO EPSON CORPORATION |