User's Guide

Index	Search

Contents	Help	Safety

Other Information

Taking PictureMate With You

PictureMate's handle makes it easy to carry short distances. If your PictureMate is going to travel a longer distance, you should pack it carefully to protect it from getting damaged.

Caution:

Keep PictureMate out of the sun and don't leave it in your car or other location where it can get too hot.

If PictureMate is on, turn it off.

Wait until the LCD screen goes blank, then unplug the power cord from the electrical outlet.

Remove paper from the paper support and output tray.

Push down the top of the paper support and close it against PictureMate. Then close the output tray.

Disconnect the power cord and any connected USB cable from the back of PictureMate.

Pack PictureMate along with its power cord and AC adapter in the box that PictureMate came.

Caution:

Make sure the photo cartridge is installed before transporting. Don't place PictureMate on its side or upside down, or ink may leak.

Note:

If your prints don't look as good after PictureMate has been moved, try aligning the print head.
See Aligning the Print Head

[Top]