User's Guide

Index
Search
Contents
Help
Safety

Other Information

Options and Consumable Products

Options
Consumable products
Using the optional battery

Options

The Options below are available for your printer.

Bluetooth Photo Print Adapter

The optional Bluetooth Photo Print Adapter is a wireless communication module used to print from mobile phones, digital still cameras, digital video cameras, PDAs, Mobile PCs, and other devices that support Bluetooth wireless technology without cables when connected to the printer.

Bluetooth unit C12C824

Note:
The asterisk is a substitute for the last digit of the product number, which varies by location.
See Printing From a Bluetooth Device

Lithium Ion Battery

An optional rechargeable battery means you can use PictureMate without the AC adapter.

Lithium Ion Battery C12C83107

Note:
The asterisk is a substitute for the last digit of the product number, which varies by location.

For details on using the optional battery, see Using the optional battery.


[Top]

Consumable products

The following photo cartridge and Epson special paper are available for your printer.

PictureMate PicturePack
(PictureMate Photo Cartridge and PictureMate Photo Paper)

T5730

PictureMate Photo Cartridge

T573G

EPSON Premium Glossy Photo Paper 10 x 15 cm (4 x 6 in.)

S041692
S041730
S041750

EPSON Premium Semigloss Photo Paper 10 x 15 cm (4 x 6 in.)

S041925

Note:
  • The availability of special paper varies by location.


[Top]

Using the optional battery

Note:
  • Install the battery after installing the first photo cartridge and after ink charging is finished.
  • You cannot save data on the memory card to an external device when using the battery. Connect the AC adapter to PictureMate when you save data.
  • When you copy data on a computer to your memory card, confirm that there is enough power in the battery. If the battery runs out, saving is canceled, and corrupted data may remain on the memory card.

For safety instructions for the battery, see Safety Instructions.

Installing the battery

Follow the steps below to install the battery.

Make sure that PictureMate is turned off.

Unplug the AC adapter from the printer.

Open the battery cover.

Insert the battery into the compartment in the direction shown below until it is fixed in place.

Note:
Push the battery all the way into the compartment so that it locks into place as shown below.

Close the battery cover.

Removing the battery

Make sure that PictureMate is turned off.

Open the battery cover.

Move down the battery latch and pull out it.

Close the battery cover.

Charging the battery

After installing the battery, charge the battery using the AC adapter.

Make sure that the battery is installed.

Connect the power cord and AC adapter, then plug in PictureMate.

When PictureMate is off, the power light blinks during charging. When the battery is fully charged, the power light turns off.

When PictureMate is on during charging, icon blinks on the LCD panel. When the battery is fully charged, icon appears.

Note:
The battery may not be charged correctly if the temperature of the operation is not guaranteed.

Checking the battery status

Using the LCD panel

The battery status is always displayed at the top left corner of the LCD panel.

Icon

Status

Sufficient battery power

When the icon is yellow, battery power is low. When the icon is red, battery power is almost empty.

Battery power is running out.

Battery is charging.

Battery is fully charged.

For Windows

You can check the battery status using EPSON Status Monitor 3. See Using EPSON Status Monitor 3 for details.

For Macintosh

You can check the battery status using EPSON StatusMonitor. See Using EPSON StatusMonitor for details.

Battery performance

Charging Time

Approx. 2 hours at maximum

Continuous Print Time

Approx. 90 minutes

Number of Prints

Approx. 50 sheets (4 x 6 in.) *

*  When printing from a Memory Stick with a fully charged, fresh battery, at room temperature. The number of sheets varies depending on the memory card, data size, and other conditions.

Auto Power Off

When the battery is used to power PictureMate, PictureMate will automatically turn off to save battery power if it is idle for about 15 minutes.

Note:
When a memory card is inserted and PictureMate is connected to a computer, it will not turn off automatically.


[Top]


Previous

Next
Version NPD1531-00, Copyright © 2005, SEIKO EPSON CORPORATION