Reference Guide

Index
Search
Glossary
Contents
Help

Product Information / Using the Bluetooth Photo Printer Adapter

Bluetooth Settings

Outline of settings
Making settings

Use the LCD panel on this product to make settings for Bluetooth wireless communication. See Making settings for details.

Outline of settings

Setting

Choices

Description

BT Printer ID Set

printer name-(number)
(Default = 0)

If multiple printers enabled with Bluetooth are in the same communication range, distinguish them by assigning each number from 0 through 9.

To make the Device Name Setting take effect, turn this product off and then back on.

BT Connectivity Mode

Discoverable

This mode allows devices enabled with Bluetooth to freely discover the printer and print.

Not Discoverable

This mode prevents unknown devices from discovering this product.

To print in this mode, first search for this product once in Discoverable mode. After your device has discovered this product in Discoverable mode once, it will subsequently be able to communicate with and print from it in this mode.

Pairing

This mode requires that the four-digit Passkey be entered into a device before it can communicate with and print from this product.

BT Encyption

On/Off
(Default = Off)

Select On to encrypt communication. Encryption requires that the four-digit Passkey be entered into a device before it can communicate with and print from this product.

BT PIN Code Set

Any four-digit number
(Default = 0000)

This setting allows you to set the four-digit Passkey that must be entered into a device before printing if Pairing is selected as the BT Connectivity Mode or if BT Encryption is On.

BT Device Address

Set at the factory
(Example) 11-11-11-11-11-11

Displays the unique Bluetooth Device Address of this product.


[Top]

Making settings

Connect the Bluetooth Photo Print Adapter to this product. Refer to Connecting and Disconnecting the Bluetooth Photo Print Adapter.

Caution:
Be sure that this product is not operating before connecting the adapter. Otherwise, the Bluetooth Photo Print Adapter may malfunction.

Press the Setup button to enter the Setup mode.

Select the Bluetooth settings.

1. Select the Bluetooth settings.
2. Press the OK button.

Change the settings of each item. Refer to Outline of settings for information about Bluetooth settings.

The Bluetooth Passkey setting (BT PIN Code Set)

If you select Pairing as the BT Connectivity Mode or On as the BT Encryption setting, the Passkey must be entered into a Bluetooth wireless-capable device before it can communicate with and print from this product. The default Passkey is 0000.

To change the Passkey, follow the instructions below. A Passkey of 1234 is used as an example.

Select BT PIN Code Set.

1. Select BT PIN code set.
2. Press the OK button.

Press the / buttons to select a number for the first digit, then press the / buttons to change the digit.

1. Select the digit number.
2. Change the digit.

Select numbers for the second through fourth digits in the same manner, then press the OK button to activate the Passkey.


[Top]


Previous

Next
Version NPD0904-00, Copyright © 2005, SEIKO EPSON CORPORATION