|
||||||||||||
![]() |
Print Quality ProblemsIf you are having print quality problems, then compare it with the illustrations below. Click the caption under the illustration that best resembles your printout.
Horizontal bandingMake sure the printable side of the paper is face down in the paper cassette.
Run the Nozzle Check utility and then clean any print heads which produced a defective nozzle check result.
![]() For best results, use up ink cartridge within six months of opening the package.
Try to use genuine Epson ink cartridges.
Check the ink cartridge status by using EPSON Status Monitor 3 (Windows) or EPSON Status Monitor (Mac OS X).
![]() If the graphic displays the ink is low or expended, replace the appropriate ink cartridge. ![]() Make sure the paper type selected in the printer driver is appropriate for the type of paper loaded in the printer.
![]() Vertical misalignment or bandingMake sure the printable side of the paper is face down in the paper cassette.
Run the Nozzle Check utility and then clean any print heads which produced a defective nozzle check result.
![]() Clear the High Speed check box from the Advanced window in your printer driver (Windows). See the online help for details.
Make sure the paper type selected in the printer driver is appropriate for the type of paper loaded in the printer.
![]() Incorrect or missing colorsFor Windows, clear the Grayscale setting in the Main or Advanced window in your printer driver.
For Mac OS X, change the Color setting to Color in Print Settings in the Print dialog box in your printer driver. See the printer driver online help for details. Adjust the color settings in your application or in your printer driver settings.
For Windows, check the Advanced window. For Mac OS X, check the Print Settings dialog box from the Print dialog box. See the printer driver online help for details. Run the Nozzle Check utility and then clean any print heads which produced a defective nozzle check result.
![]() Check the ink cartridge status by using EPSON Status Monitor 3 (Windows) or EPSON Status Monitor (Mac OS X).
![]() If the graphic displays the ink is low or expended, replace the appropriate ink cartridge. ![]() If you have just replaced an ink cartridge, make sure the date on the box. If you have not used the printer for a long time, Epson recommends replacing the ink cartridges.
For details on replacing an ink cartridge before it is expended, see the booklet. Blurry or smeared printoutUse only paper recommended by Epson.
For details on Epson special media, click the Appendix tab in the upper right corner of the User’s Guide window. Then click Product Information and Ink and Paper. Try to use genuine Epson ink cartridges.
Make sure the printer is on a flat, stable surface that extends beyond the base in all directions. The printer will not operate properly if it is tilted.
Make sure your paper is not damaged, dirty, or too old.
Make sure your paper is dry and the printable side is face down in the paper cassette.
If the paper is curled toward the printable side, flatten it or curl it slightly in the opposite direction.
Make sure the paper type selected in the printer driver is appropriate for the type of paper loaded in the printer.
![]() Remove each sheet from the output tray as it is printed.
If you are printing on glossy media, place a support sheet (or a sheet of plain paper) beneath the stack, or load only one sheet at a time.
Do not touch or allow anything to come into contact with the printed side of paper with a shiny finish. To handle your printouts, follow the instructions of the paper.
Run the Nozzle Check utility and then clean any print heads which produced a defective nozzle check result.
![]() If the paper is smeared with ink after printing, clean the interior of the printer. For details on cleaning the printer, click the Appendix tab in the upper right corner of the User’s Guide window. Then click Maintenance and Cleaning the Printer.
| ![]() |
||||||||||