|
|
Maintenance
Connecting the USB cable to this product
Disconnecting the USB cable from this product
| Make sure this product is turned off and all of its lights are off. |
| Open the scanner unit and USB connection cover. |
| Plug the connector of the USB cable into the USB port of this product, and then place its cable in the slot. |
| Close the USB connection and scanner unit. |
| Make sure this product is turned off and all of its lights are off. |
| Open the scanner unit and USB connection cover. |
| Disconnect the USB cable from this product, as shown in the illustration below. |
| Close the USB connection and scanner unit. |
Previous |
Next |
Version NPD1043-00, Copyright © 2005, SEIKO EPSON CORPORATION |