|
|
Product Information / Product Specifications
Using this product
Using the Reference Guide and Photo Print Software Setup
Refer to the appropriate section below for the minimum and recommended computer system requirements necessary to use this product.
To connect this product to a USB port, you need a Microsoft® Windows® Millennium Edition, Windows 98, Windows XP, or Windows 2000 pre-installed PC equipped with a USB port and this product must be connected via a standard, shielded USB cable.
Your computer should also meet the following system requirements.
|
Minimum |
Recommended |
CPU |
|
|
RAM |
|
|
HDD Space |
|
|
Others |
SVGA monitor (800 x 600) |
XGA or better monitor (1024 x 768) |
For EPSON Smart Panel and ArcSoft PhotoImpression, Windows 98 in the above table means Windows 98 Second Edition or later.
Your computer dealer can help you update your system if it does not meet these requirements.
Your Macintosh must also meet the following system requirements.
|
Minimum |
Recommended |
Operating System |
Mac OS 9.1 or later |
Mac OS 9.1 or later |
CPU |
PowerPC G3 233 MHz |
PowerPC G4 500 MHz |
RAM |
128 MB |
256 MB |
HDD Space |
50 MB |
500 MB |
|
Minimum |
Recommended |
Operating System |
Mac OS X 10.2 |
Mac OS X 10.2 or later |
CPU |
PowerPC G3 233 MHz |
PowerPC G4 500 MHz |
RAM |
128 MB |
512 MB |
HDD Space |
50 MB |
1.0 GB |
Note: |
|
|
|
In addition to these system and memory requirements, you need 20 MB of free hard disk space to install your printer software. To print, you also need extra hard disk space amounting to about twice the size of the file that you want to print.
For Windows |
|
Browser |
Web browser |
For Macintosh |
|
Browser |
Web browser |
Previous |
Next |
Version NPD0904-00, Copyright © 2005, SEIKO EPSON CORPORATION |