|
|
|
|||||||||||||||||||||||||||||||||
Maintenance
Disconnecting the USB cable from this product
 | Make sure this product is turned off and all of its lights are off. |
 | Open the scanner unit. |
 | Disconnect the USB cable from this product, as shown in the illustration below. |
 | Close the scanner unit. |
|
| Make sure this product is turned off and all of its lights are off. |
|
| Open the scanner unit. |
|
| Plug the connector of the USB cable (disconnected from this product earlier) into the USB port of this product, and then place its cable in the slot. |
|
| Close the scanner unit. |
| Version NPD0311-00, Copyright © 2004, SEIKO EPSON CORPORATION |
