Control Panel Functions

Buttons

Function

 On

Turns this product on and off.

Moves the print head to the ink check position when an that is empty or ink cartridge nearly empty is detected.

Moves the print head to the ink cartridge replacement position.

Returns the print head to its home position after ink cartridge replacement.

Performs print head cleaning if held down for three seconds when the ink light is off.

Copy

Enters Copy Mode and allows you to set the number of copies.

The number of copies increases by one when this button is pressed once. The number of copies is displayed in the LED window.

If you press this button when 9 is displayed as the number of copies, "-" appears in the LED window. This indicates that 100 copies will be made. To make between 10 and 100 copies, make sure that "-" is displayed, then insert the same amount of sheets in the feeder as the number of copies you want made.

If you make up to 99 copies, a paper out error will occur when this product finishes making copies and runs out of paper. To clear the error, press the  Stop button.

1 appears in the LED window if this button is pressed when "-" is displayed.

Plain Paper
Photo Paper

Selects Plain Paper or Photo Paper as the paper type. Select Plain Paper when using plain paper or recycled paper. Select Photo Paper when using DURABright Photo Paper.

A4
10x15

Selects A4 or 10x15 as the size of the paper set in the sheet feeder. 10x15 indicates 10 x 15 cm size paper. You can only copy onto A4 or 10 x 15 cm size paper when using the control panel.

Fit to Page

Reduces or enlarges the size of the copy so that the image of original document fits on the selected size of paper.

 Start B&W

Copies in grayscale.

 Start Color

Copies in color.

 Stop

Stops copying. The sheet being copied is ejected.

Light

Pattern

Status

On

On

Indicates this product is on.

Flashing (slow)

Indicates this product is copying, printing, receiving data, scanning, having an ink cartridge replaced, charging ink, or cleaning the print head.

Flashing (fast)

Indicates this product is being turned off.

Error

On or Flashing

Indicates that an error has occurred. (For details, see "Troubleshooting" in the Basic Operation Guide.)

Flashing

Indicates that the ink level in a cartridge is low.
You may continue to use it until it is empty.

On

Indicates that an ink cartridge is empty or missing.

Copy
(LED window)

1 to 9

Indicates the number of copies.

-

Indicates that 100 copies will be made.

E

Indicates that an error has occurred.

H

Indicates that the adjust lever has been set to the  position.

L

Indicates that the adjust lever has been set to the standard  position.

. (dot)

Indicates that the control panel is operating at reduced power. (The product switches to this mode after 15 minutes of inactivity. The panel reverts to normal power when any key other than the On button is pressed.)

Plain Paper
Photo Paper

On

Indicates the selected paper type.

A4
10x15

On

Indicates the selected paper size.
10x15 indicates
10 x 15 cm size paper.

Fit to Page

On

Indicates that the product has been set to copy the original so that it fits to the selected paper size.