Online Reference Guide

Index	Search	Glossary

Contents	Help

Product Information

Stylus CX Parts and Control Panel Functions

Stylus CX Parts
Control Panel Functions

Stylus CX Parts

1. Edge guide: Helps load the paper straight. Adjust the left edge guide to fit the width of your paper.

2. Sheet feeder: Feeds a stack of paper automatically.

3. Paper support: Supports the paper loaded in the paper feeder.

4. Document cover: Holds the original document you want to scan or copy in place.

5. On button: Turns this product on and off.

6. Output tray: Receives ejected paper.

7. Feeder guard: Prevents the objects which you place on the document cover from falling inside this product when opening the document cover.

8. Scanner unit: Raise and lower when you replace an ink cartridge.

1. Ink cartridge clamps: Open and close when you replace ink cartridges. The left clamp is for black and the right is for color.

1. Transportation lock lever: Unlock the transportation lock lever to release the transportation lock.

2. Carriage: The optical sensor and light source for scanning. Before scanning the carriage is in the home position.

3. Document table: Place originals face-down on the glass.

4. Control Panel: Panel operation is explained below.

[Top]

Control Panel Functions

Control Panel

You can control most copy functions from the Control Panel.

When you press the On button to turn on this product, the LCD panel shows the current copy mode, as well as the copy settings on quality, reduce/enlarge, paper size, and number of copies. Also, you can see and use the ink drop icon to check the amount of ink left. This state of the LCD panel is called the "normal display".

Buttons

Buttons	Function
On	Turns this product on and off.
Scan	Starts EPSON Smart Panel by default. Before using this feature, make sure you have installed EPSON TWAIN and EPSON Smart Panel from the software CD and connect this product to your computer.
Recall	Recalls the copy settings stored in the memory. When you press and hold the Recall button for 3 seconds, all of the settings are stored in the memory.
Reset	Resets the number of copies to one when the LCD panel is in normal display. Resets the values to their defaults when a menu item appears on the LCD panel. When you press and hold the Reset button for 3 seconds, all of the settings except language return to their defaults.
Menu	Display the menu items on the LCD panel.
Copies/Value	Increase or decrease the number of copies when the LCD panel is in normal display. Select an item or increases or decreases the setting's value when a menu item appears on the LCD panel.
B&W Copy	Copies in grayscale.
Color Copy	Copies in color. Performs the function indicated in "Press the Color copy button to xxx (indicating a function)".
Stop	Stops copying. The sheet being copied is ejected. Returns to the normal display when a menu item appears on the LCD panel.

Lights

Light	Pattern	Status
On	On	This product is on.
On	Flashing	While Initializing, data processing, copying, printing, scanning, charging ink and cleaning, and replacing an ink cartridge.
Error	On	An error occurs.

LCD panel

Messages

Messages	Status
Turning on	This product is turned on.
Warming up	This product is warming up.
Turning off	This product is turned off.
Resetting	The setting's values are reset to their defaults.
Stored	All of the settings are stored in the memory.
Recalled	The settings stored in the memory are recalled.
Moving the ink cartridge...	The ink cartridge (print head) is moving.
Printing...	This product is printing.
Scanning...	This product is scanning.
Color Copying...	This product is copying in color.
B&W Copying...	This product is copying in grayscale.

Menu items

When you press one of the Menu buttons, the following menu items appears on the LCD panel.

Menu item	Description
Quality&Paper	Selects the copy quality using the Copies/Value buttons.
Paper size	Selects the paper size by pressing the Copies/Value buttons.
Lighter/Darker	Sets the copy printout density from the five levels by pressing the Copies/Value buttons.
Reduce/Enlarge	Selects the zoom by pressing the Copies/Value buttons.
Zoom In/Out	Selects the zoom from 25 to 400% by pressing the Copies/Value buttons.
Copy mode	Selects the copy mode by pressing the Copies/Value buttons.
Language	Sets the language used on the LCD panel. Press the Copies/Values buttons to select the display language.
Head Alignment	When "Press the Color copy button to print head alignment pattern." appears on the LCD panel, press the Color Copy button to print head alignment pattern and align the print head.
Nozzle Check	When "Press the Color copy button to print nozzle check pattern." appears on the LCD panel, press the Color Copy button to print nozzle check pattern.
Head Cleaning	When "Press the Color copy button to clean the print head." appears on the LCD panel, press the Color Copy button to clean the print head.
Change Cartridge	When "Press the Color copy button to replace the ink cartridge." appears on the LCD panel, press the Color Copy button to replace the ink cartridge.
Ink Levels	The amount of ink left appears as a percentage between 0% and 100%, in 10% increments.
Load/Eject	When "Press the Color copy button to load/eject paper." appears on the LCD panel, press the Color Copy button to load or eject paper.

[Top]