Buttons and Lights

1

Font button

Selects the font.

2

Condensed button

Turns on and off the condensed mode.

3

Reset

When you press both the Font and Condensed buttons simultaneously, the printer clears its buffer and return to its default settings.

4

Tear Off/Bin button

• Advances continuous paper to the tear-off position.

• Feeds continuous paper backward from the tear-off
  position to the top-of-form position.

• Selects a cut-sheet feeder bin.

• Turns on the card mode to print on postcards and envelopes.

5

Tear Off/Bin lights

• when continuous paper is in the tear-off position.

• when bin 1 of the optional cut-sheet feeder is selected.

• when bin 2 of the optional cut-sheet feeder is selected.

• when the printer is in the card mode.

6

Pause button

Stops printing temporarily, and resumes printing when pressed again. When pressed for three seconds, turns on the *micro adjust mode. To turn off, press again.

7

Pause light

• On when the printer is paused.

• Flashes when the printer is in the *micro adjust mode.

• Flashes when the print head has overheated.

8

Paper Out light

• On when no paper is loaded in the selected paper source or paper is not loaded correctly.

• Flashes when paper has not been fully ejected or a paper jam has occurred.

9

*Micro Adjust mode

When you hold down the Pause button for three seconds, the printer enters the micro adjust mode. In this mode, you can press the LF/FF and Load/Eject buttons to adjust the top-of-form or tear-off position. See Using the tear-off function.

10

LF/FF button

• Feeds paper line by line when pressing shortly.

• Ejects a single sheet or advances continuous paper to the next top-of-form position when held down.

11

Load/Eject button

• Loads a single sheet of paper.

• Ejects a single sheet of paper if a sheet is loaded.

• Loads continuous paper from the standby position.

• Feeds continuous paper backward to the standby position.

1

Font button

Selects the font.

2

Condensed button

Turns on and off the condensed mode.

3

Reset

When you press both the Font and Condensed buttons simultaneously, the printer clears its buffer and return to its default settings.

4

Pause button

Stops printing temporarily, and resumes printing when pressed again. When pressed for three seconds, turns on the *micro adjust mode. To turn off, press again.

5

Pause light

• On when the printer is paused.

• Flashes when the printer is in the *micro adjust mode.

• Flashes when the print head has overheated.

6

Paper Out light

• On when no paper is loaded in the selected paper source or paper is not loaded correctly.

• Flashes when paper has not been fully ejected or a paper jam has occurred.

7

Paper Source button & lights

Select a paper source. See Selecting a Paper Source.

8

Tear Off/Special Paper button

• Advances continuous paper to the tear-off position.

• Feeds continuous paper backward from the tear-off position to the
  top-of-form position.

• Turns on the card mode or envelope mode.

9

Tear Off/Special Paper lights

• when continuous paper is in the tear-off position.

• when the printer is in the card mode.

• when the printer is in the envelope mode.

10

*Micro Adjust mode

When you hold down the Pause button for three seconds, the printer enters the micro adjust mode. In this mode, you can press the LF/FF and Load/Eject buttons to adjust the top-of-form or tear-off position. See Using the tear-off function.

11

LF/FF button

• Feeds paper line by line when pressing shortly.

• Ejects a single sheet or advances continuous paper to the next top-of-form position when held down.

12

Load/Eject button

• Loads a single sheet of paper.

• Ejects a single sheet of paper if a sheet is loaded.

• Loads continuous paper from the standby position.

• Feeds continuous paper backward to the standby position.