Printer Driver Settings Overview

Paper Size

Select the size of the paper you want to use. If you do not see your paper size, use the scroll bar to scroll through the list. If your paper size is not included in the list, see Definition of Custom Paper Size for instructions.

Orientation

Select Portrait or Landscape.

Paper Source

Select the paper source you want to use.

Graphic - Print Quality

Select the printing resolution you want. The higher the resolution you select, the more detailed your printout will be; however, increasing the resolution slows printing.

Halftoning

Select the type of halftoning to use when printing graphics. To let the printer determine the best halftone quality, use Auto Select.

Printer Font Setting

Select a character table group to use. You can select one of two character table groups, Standard and None (bit image printing).

When Standard is selected, the printer uses the device fonts.

When None is selected, the printer uses bit map images instead of the device fonts.

For details on the fonts which are included in each table, see your printer’s documentation.

Page Order*

Select whether to print from front to back or back to front.

Pages Per Sheet*

Select the number of pages that you want to print onto a single page.

Copy Count*

When you select more than one in the Number of copies box, this check box appears and you can select whether to collate the pages of the copies.

Advanced Printing Features*

Select Enable or Disable for the metafile Spooling.

Print Optimizations*

Select Disable when the printer does not use the device fonts and select Enable when the printer uses the device fonts.

Printable Area

If Standard is selected, the normal printable area for Epson impact printers is used.

If Maximum is selected, the printer’s maximum printable area is used.

Top Margin Priority

Select which setting for the print-start position is to be used; driver setting or printer setting. For more details, see Help for the printer driver.

Packet Mode

Ordinarily, there is no need to change this setting. If you change the printer’s Packet Mode settings, change this setting to match. If the printer and printer driver settings are different, you may not be able to print correctly. For more details, see Help for the printer driver.

User Defined Paper

If your paper is not included in the Paper Size drop-down list, you can add the size to the list. For more details, see Help for the printer driver.

Offset

This setting allows you to offset the image on the page. That is, you can adjust the position of the printed image. If the offset you specify moves a portion of the image out of the printer’s printable area, that portion will not be printed.

Print Speed

This setting allows you to select print speed. Select Printer Setting when you want to print using the settings stored in the printer. When Standard is selected, prints in standard printing mode. When High Speed is selected, prints in high-speed printing mode.

Print Direction

This setting allows you to select bidirectional printing. Selecting the Printer Setting will use the setting stored in the printer. Selecting Bidirectional will print in bidirectional printing mode. Selecting Unidirectional will print in unidirectional printing mode.

EPSON Status Monitor 3

You can access EPSON Status Monitor 3 when you click this button. To monitor the printer, make sure the Monitor the printing status check box is selected.

Monitoring Preferences

Click this button to open the Monitoring Preferences dialog box where you can make settings for EPSON Status Monitor 3. See Setting up EPSON Status Monitor 3 for more information.

Bi-D Adjustment

Click this button to open the Bi-D Adjustment dialog box where you can adjust misalignment in vertical lines.

Printer Setting

Click this button to open the Printer Settings utility dialog box where you can change the printer settings.